AST3TQ-T-10.000MHZ-50-SW-T2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AST3TQ-T-10.000MHZ-50-SW-T2 oscillator belongs to the oscillators family. The main characteristics of this oscillator are its 10.000 MHz output and its 50-ohm pullability. This oscillator is typically used in applications that require a stable signal with a high frequency output, such as radio communication, frequency synthesis, laboratory and microwave systems, and signal generator applications.

The AST3TQ-T-10.000MHZ-50-SW-T2 oscillator consists of two basic components, a crystal oscillator and a frequency synthesizer. The crystal oscillator is used to generate a signal with a specific frequency, which is then amplified and transmitted by the frequency synthesizer. The output of the oscillator can be adjusted by adjusting the frequency synthesizer.

When the oscillator is operating, it is constantly scanning the crystal for stability. Once a stable signal is detected, the frequency synthesizer amplifies the signal and passes it to the output. When the frequency of the signal is greater than the set frequency, the amplifier is turned off and the frequency is reduced. This process is repeated continuously, enabling the oscillator to maintain a stable and accurate output.

The key to the accuracy and stability of the AST3TQ-T-10.000MHZ-50-SW-T2 oscillator lies in its temperature-compensated and thermally-stable crystal. This crystal is designed to compensate for temperature variations and offer a high degree of accuracy, making it suitable for precision timing applications. The crystal also ensures a high level of repeatability throughout its lifetime, which makes it a reliable frequency reference.

The AST3TQ-T-10.000MHZ-50-SW-T2 oscillator also features digital phase-locked loop (DPLL) technology. This technology enables the oscillator to sample and measure the frequency of the signal, and then adjust it according to predetermined parameters. This ensures that the signal remains within the specified frequency range and exhibits minimal drift. The DPLL technology also enables the oscillator to adjust its output in response to external changes, such as temperature fluctuations, which can create problems for traditional quartz oscillators.

The AST3TQ-T-10.000MHZ-50-SW-T2 oscillator is designed to provide a reliable, stable, and precise signal source with a wide variety of applications. From radio communications and frequency synthesis to microwave systems and signal generators, this oscillator is an ideal choice for professionals requiring a reliable and accurate source of reference signals.

The specific data is subject to PDF, and the above content is for reference