AST3TQ-T-12.800MHZ-50-SW-T5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic circuits that periodically produce electrical signal with a specific operation frequency. A frequency generator provides a suitable reference frequency for numerous applications, such as testing, communication, navigation, and much more. AST3TQ-T-12.800MHZ-50-SW-T5 is an oscillator that produces sine wave output signals.

Overview of AST3TQ-T-12.800MHZ-50-SW-T5

The AST3TQ-T-12.800MHZ-50-SW-T5 is a quartz-controlled frequency generator. It is designed to be mounted on a circuit board. It also comes with a Plastic-Molded case, which provides adequate protection from moisture and allows for easy installation. The unit has a set frequency range of 0.0 to 12.800MHz with a temperature stability of ± 50ppm. The output impedance is guaranteed from 0.5 ohms to 2 ohms and the maximum output voltage of 1Vpp is provided at the 10-ohm test point.

Application Field and Working Principle

The AST3TQ-T-12.800MHZ-50-SW-T5 is typically used as a reference frequency generator for navigation, communication, and other applications requiring a stable and accurate timing reference. The AST3TQ-T-12.800MHZ-50-SW-T5 features a crystal resonator and a quartz-controlled oscillator module, which ensures a superior frequency accuracy over a wide temperature range. The device also has a low phase noise with a typical level of 0.2 dBc/Hz at 1MHz offset from the carrier frequency.

The AST3TQ-T-12.800MHZ-50-SW-T5 is an easy-to-install frequency generator that provides a stable and accurate timing reference. The device\'s internal oscillator is controlled by a crystal resonator, which helps to reduce the device\'s power dissipation and produces a low phase noise signal, perfect for critical applications. The device provides a maximum output voltage of 1Vpp at the 10-ohm test point and a set frequency range of 0.0 to 12.800MHz.

Conclusion

The AST3TQ-T-12.800MHZ-50-SW-T5 is a precision frequency generator specifically designed for applications requiring a stable and accurate timing reference. It has a set frequency range of 0.0 to 12.800MHz with a temperature stability of ± 50ppm. The device\'s low phase noise and its crystal-controlled oscillator module help to ensure a superior frequency accuracy over a wide temperature range. The unit\'s plastic-molded case provides adequate protection from moisture and facilitates an easy installation on a circuit board. The device\'s output voltage can reach 1Vpp at the 10-ohm test point, making it an ideal solution for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference