AST3TQ-V-19.200MHZ-50-C-T5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used in a variety of applications in electronics, communication, navigation and timing. As its name implies, an oscillator is an electronic circuit that produces a continuous train of pulses or oscillations. The frequency of these pulses is determined by an LC-oscillator or an RC-oscillator circuit. An LC-oscillator is composed of an inductor and a capacitor, while an RC-oscillator is composed of a resistor and a capacitor.

The AST3TQ-V-19.200MHZ-50-C-T5 oscillator is a crystal-controlled oscillator with a frequency of 19.200MHZ. This type of oscillator is capable of maintaining its frequency to very high tolerances, due to the stability of the quartz crystal. The Quartz crystal is the most important part of the oscillator, which acts as a frequency-determining element. It is also the most expensive component of the oscillator. The quartz crystal is very sensitive to temperature and is thermally compensated to ensure accurate frequency at various temperatures.

The AST3TQ-V-19.200MHZ-50-C-T5 oscillator is used in a variety of applications such as radio receivers, transmitters, base stations, navigation systems, computer peripherals, cellular phones, and medical and instrumentation equipment. Its high frequency makes it very suitable for communications and digital circuits. The stability of the quartz crystal ensures that the frequency of the oscillations remains stable even in extreme temperatures.

The AST3TQ-V-19.200MHZ-50-C-T5 oscillator is a voltage-controlled oscillator (VCO) which means that the output frequency is controlled by means of a control voltage. The control voltage is applied to the oscillator through a frequency control pin and can be varied between a minimum value and a maximum value (depending on the oscillator). The frequency then varies linearly with the control voltage. A wide frequency range and tuning range are possible with this type of oscillator, allowing for many different applications.

The AST3TQ-V-19.200MHZ-50-C-T5 oscillator is based on the phase-locked loop (PLL) principle. This principle works by using a reference oscillator to generate a reference signal which is then used to “lock” the output oscillator to a specific frequency. The output oscillator is then tuned to the desired frequency by altering the frequency control voltage. This type of oscillator provides high frequency stability, allowing for very precise frequency control.

The AST3TQ-V-19.200MHZ-50-C-T5 oscillator is also capable of providing fast settling time and frequency switching time. The frequency of the oscillator can be changed very quickly with very little change in the actual frequency and accuracy. These features make the oscillator very useful for a wide range of applications.

The AST3TQ-V-19.200MHZ-50-C-T5 oscillator is widely used in a variety of communication and digital circuits as well as for timing and navigation applications. Its high frequency, low phase noise, fast settling time and frequency switching time make it an attractive choice for many designers. The oscillator is capable of operating over a wide temperature range and its frequency can be accurately controlled. The oscillator is a cost-effective solution and is widely used in a variety of systems including radio receivers, transmitters, base stations, and navigation systems.

The specific data is subject to PDF, and the above content is for reference