ASTMHTA-125.000MHZ-ZC-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are used to generate a series of electrical signals, and ASTMHTA-125.000MHZ-ZC-E-T3 is one such type of oscillator. It is a type of electrical oscillator that works by passing a current between two points and then using the resulting signal to generate oscillations at a frequency determined by the parameters of the circuit.

The ASTMHTA-125.000MHZ-ZC-E-T3 is a crystal oscillator which utilizes a quartz crystal as its main component. Quartz crystals are naturally piezoelectric, meaning that they can convert mechanical energy into electrical energy and vice versa. As the quartz crystal vibrates at its native frequency, it creates shifts in the electric charges across its surfaces, and these shifts produce an alternating current at the same frequency.

The ASTMHTA-125.000MHZ-ZC-E-T3 oscillator combines the quartz crystal with a special circuit design, which amplifies the signal created by the crystal and separates it into two signals that are 180 degrees out of phase with each other, thus creating two alternating waves. This circuit also compensates for any changes in frequency due to external factors such as temperature and pressure. The resulting sine wave output is clean and accurate, and can be used to generate oscillations at a wide range of frequencies.

The primary application field of ASTMHTA-125.000MHZ-ZC-E-T3 oscillators is in radio frequency (RF) communication systems. The oscillators are used to generate signals for communication between various components in a system. For example, they can be used to generate the carrier wave on which an audio or video signal is modulation. They are also used to generate signals for synchronization of different circuits in a system.

The ASTMHTA-125.000MHZ-ZC-E-T3 oscillator is also useful for generating timing signals. Oscillators can be used to control the speed of a motor or to regulate the frequency of pulses of an electronic signal. They are commonly used in embedded microcontroller applications and are often the clock source for microprocessors.

The ASTMHTA-125.000MHZ-ZC-E-T3 oscillator is a reliable and cost-effective solution for generating precision oscillations. Its accuracy and stability make it ideal for both industrial and consumer applications. Its wide range of frequencies and low power consumption make it a popular choice for many applications.

The specific data is subject to PDF, and the above content is for reference