ASTMHTA-20.000MHZ-AC-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic devices that produce a periodic, oscillating electronic signal, often a sine wave or a square wave. They are widely used in many different applications, from wireless communications to audio processing. The ASTMHTA-20.000MHZ-AC-E is one such oscillator designed for use in sophisticated applications, such as high frequency radio systems, multi-frequency analysis systems, active antenna systems, and computerized testing and measurement.

Application Field and Working Principle

The ASTMHTA-20.000MHZ-AC-E can be used in applications where accurate frequency stability is important. It is designed for use in high-performance systems, such as ultra-wideband communication systems, radar systems, and measurement and diagnostic equipment. This oscillator can be used in applications up to 20MHz, providing a reliable source of stable frequency signals.

The ASTMHTA-20.000MHZ-AC-E operates on a SiGe semiconductor process. This process provides a very stable frequency output with low jitter and low power consumption. The oscillator also features a setting resistor for fine-tuning its frequency and temperature stability. The device also has a range of frequency adjustment beams that allow for precise control over the center frequency.

The ASTMHTA-20.000MHZ-AC-E is designed to operate at temperatures between -20°C to +85°C. It has a higher output power than conventional oscillators, so it can be used in applications where higher power consumption is necessary. The oscillator features built-in temperature compensation, allowing it to maintain a very stable frequency over an extended temperature range.

The ASTMHTA-20.000MHZ-AC-E\'s working principle is based on the use of a quartz crystal to control its output frequency. This quartz crystal is mounted in an oven that is thermally-regulated to maintain a temperature close to 25°C. The crystal acts as the frequency setting element, producing an output frequency that is proportional to its mechanical stiffness. The frequency output is further affected by other factors, such as temperature, humidity, shock, pressure, and vibration.

The ASTMHTA-20.000MHZ-AC-E is an accurate and reliable oscillator for use in sophisticated applications. It has a wide range of controls, allowing it to be used in high-performance communications and measurement equipment. Its low power consumption, frequency stability, and temperature compensation ensure that the oscillator is reliable and precise even in the toughest operating conditions.

The specific data is subject to PDF, and the above content is for reference