ASTMHTA-20.000MHZ-ZR-E

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-55°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	20MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are commonly used in many electronic applications and are designed to generate electrical signals at a specific frequency. ASTMHTA-20.000MHZ-ZR-E is a high-frequency, low-power oscillator designed specifically for use in radio communications. It is designed to oscillate at a frequency of 20 MHz and operates on a 3 volt supply. The ASTMHTA- 20.000MHZ-ZR-E oscillator is a voltage-controlled oscillator (VCO) which uses an external voltage source to control the oscillator frequency. The oscillator is designed to be used in radio transmission applications and as a clock signal source. The oscillator is constructed from an integrated circuit consisting of a voltage controlled oscillator (VCO) and an associated buffer which buffers the output signal. There are two types of outputs available for this oscillator: an analog and a digital output.The analog output is a sine wave which has a low-frequency and a high-frequency components. The low-frequency component is typically in the range of 5-20MHz and the high-frequency component ranges from 10-30MHz. This output is used for analog radio applications, such as FM radio reception. The high-frequency component can be used as a clock signal source for digital applications such as cellular phones or satellite receivers.The digital output is a square wave output which consists of two frequencies, one at the low-frequency range and the other at the high-frequency range. This digital output is designed to provide a very stable, repeatable output signal for various digital applications. It is especially useful in digital communication links which require precise timing between various stations.The working principle of the ASTMHTA-20.000MHZ-ZR-E oscillator is based on the principle of phase-locked loop (PLL). The VCO is designed to respond to an external voltage source to produce a sinusoidal waveform at the specified frequency. A phase detector is used to compare the frequencies of the input and output signals and to generate a corrective error signal. This error signal is then fed into a voltage-controlled amplifier which adjusts the output frequency until it matches the input frequency. This oscillator is typically used in a wide range of radio applications such as radio transmitters, receivers, transceivers, and other telecommunications equipment. The ASTMHTA-20.000MHZ-ZR-E oscillator has a wide temperature range of -40° to +85°C and a frequency range of 20MHz to more than 30MHz. It is designed to provide a highly stable and accurate signal for long-term operation and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description