ASTMHTA-80.000MHZ-AR-E-T

Oscillators

ASTMHTA-80.000MHZ-AR-E-T is an oscillator with varied applications in electronics and radio engineering. The most common use is for frequency generation or modulation, but it can also be used as a phase-locked loop depending on the electronic circuitry needed. The oscillator features a wide frequency range and low noise. The operating principle is based on a sinusoidal wave source, usually a quartz crystal, with a transistor amplifier and a resistive shunt.

Features

• High Frequency Range: Up to 80.000MHz.
• Low Noise: Output noise is typically less than 1.0dB.
• Low Current Consumption: Operates at less than 10mA.
• General Functionality: Can be used as a frequency generator, modulator or in a phase-locked loop.

Application Areas

ASTMHTA-80.000MHZ-AR-E-T is a popular choice for a variety of applications and industries. The frequency range and low noise make it an ideal choice for radio engineering as it can be used to transmit signals with little interference or background noise. Additionally, the oscillator is used in laboratory and scientific experiments, as it can generate precise frequencies for experiments. Furthermore, the oscillator can also be used in the medical field to generate pulses for defibrillators or heart rate monitors. Finally, the oscillator is a popular choice for hobbyists or amateur radio users due to its low cost and general versatility.

Working Principle

The working principle of ASTMHTA-80.000MHZ-AR-E-T is based on a sinusoidal wave generator, usually a quartz crystal, which is connected to a transistor amplifier and a resistive shunt. The quartz crystal oscillates at its resonant frequency, and the transistor amplifier amplifies the oscillator signal to a desired level. The resistive shunt is used to control the output current of the oscillator, and the output is then taken off from the capacitor.

The resistor serves to control the output current by providing various amounts of feedback. The capacitor also helps in stabilizing the circuit and reduces the amount of noise. This ensures that the output is a smooth sinusoidal wave, with minimal variations in the frequency, and the output signal is filtered for low-noise operation. By adjusting the input signal, the output frequency of the oscillator can be adjusted and tuned to the desired frequency.

Conclusion

ASTMHTA-80.000MHZ-AR-E-T is a versatile oscillator with a wide frequency range and low noise. It can be used for frequency generation, modulation or in a phase-locked loop, making it a popular choice for many applications. The operating principle is based on a quartz crystal oscillator, a transistor amplifier and a resistive shunt, allowing precise frequency control and adjustment. Overall, the oscillator is a reliable and cost-effective choice for numerous radio engineering and electrical engineering applications.