ASTMHTD-10.000MHZ-ZR-E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ASTMHTD-10.000MHZ-ZR-E oscillator is an important type of oscillator, which is widely used in many engineering and technological fields. It is mainly used to generate or measure a precise frequency or timing. It is commonly used as part of a range of different electronic systems, such as those used in communications systems, navigation systems, instrumentation systems, and so on. In order to understand the application field and working principle of the ASTMHTD-10.000MHZ-ZR-E oscillator, it is important to look at the two basic components of this type of oscillator; the resonator and the amplifier.

The resonator is the main component of the oscillator, which is responsible for generating the signal at the desired frequency. It is typically made up of a piezoelectric crystal, which vibrates at a specific frequency when a specific voltage or current is applied. The crystal is held in place by a holder which is attached to a case. An electrical connection is made to the crystal by means of two contact pins, one connected to the crystal and one to ground.

The amplifier is used to amplify the electrical signal generated by the resonator, so that the signal is strong enough to be used in the system. The amplifier typically consists of two circuits, one to amplify the signal and the other to provide feedback in order to maintain the same frequency as the resonator. The amplifier can also be used to adjust the frequency of the resonator, so that the frequency can be precisely controlled.

Once the two components of the oscillator have been connected, then the system is ready for operation. The frequency of the oscillator is determined by the frequency of the resonator, which is determined by the voltage applied to it. The amplifier can be used to adjust the frequency of the resonator and hence the frequency of the oscillator. The frequency of the oscillator can be varied over a wide range, from very low frequencies up to high frequencies.

The ASTMHTD-10.000MHZ-ZR-E oscillator has a wide range of applications in the engineering and technological fields. It can be used as a high frequency signal generator in instrumentation systems, communications systems, navigational systems, and so on. It is also used for frequency measurement applications, such as the measurement of temperature, pressure, speed, position, etc. In addition, it is used as a time base in oscilloscope and electronic test equipment.

In conclusion, the ASTMHTD-10.000MHZ-ZR-E oscillator is an important type of oscillator which is widely used in many engineering and technological fields. It is composed of two components: a resonator and an amplifier, which work together to generate and adjust the frequency of the oscillator. With its wide range of applications, the ASTMHTD-10.000MHZ-ZR-E oscillator can be used for many different purposes, such as generating and measuring precise signals and as a time base for frequency measurement applications.

The specific data is subject to PDF, and the above content is for reference