ASTMHTD-24.576MHZ-ZK-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical circuits which generate an oscillating output in the form of a periodic waveform. The ASTMHTD-24.576MHZ-ZK-E-T3 oscillator is a crystal controlled oscillator designed for a wide range of applications. This article will discuss the application field and working principle of this oscillator.

The ASTMHTD-24.576MHZ-ZK-E-T3 is a low power oscillator that is suitable for use in many different electronic devices, including consumer electronics, medical electronics, automotive electronics, and industrial applications. The oscillator can be used for frequency synthesis, signal generation, and communications. It has a low phase noise, low power consumption, and low EMI emission.

The ASTMHTD-24.576MHZ-ZK-E-T3 oscillator operates using a quartz crystal as its resonator. The crystal is wired to an oscillator circuit, which is then connected to either a power supply or a microcontroller. The crystal is capable of producing an output frequency of 24.576MHz, with an output tolerance of ±50ppm or ±100ppm. The oscillator circuit generates a sine wave output signal with a peak to peak amplitude of 5V.

The working principle of the ASTMHTD-24.576MHZ-ZK-E-T3 oscillator is based on electrical resonance. When a voltage is applied to the crystal, it vibrates at its resonant frequency. This vibration is then amplified by the oscillator circuit and buffered by a frequency divider, thus producing a signal with a fixed frequency. The output frequency can be adjusted by changing the capacitances or inductances of the crystal.

The ASTMHTD-24.576MHZ-ZK-E-T3 oscillator is widespread in a variety of applications. One of the most common applications is in the communication industry, as the oscillator can be used in cellular base stations and radios. Additionally, oscillators of this type can be used in medical imaging systems, automotive navigation systems, and microwave ovens. In each case, the oscillator ensures that the components operate at the desired frequency, making these systems more reliable and efficient.

In summary, the ASTMHTD-24.576MHZ-ZK-E-T3 oscillator is a low power, low cost, reliable oscillator designed for a variety of applications. It is based on electrical resonance, using a quartz crystal as the resonator, and has a frequency output of 24.576MHz. It is used in the communications industry, as well as medical imaging systems, automotive navigation systems, and microwave ovens. The output frequency can be adjusted by changing the capacitances or inductances of the crystal.

The specific data is subject to PDF, and the above content is for reference