ASTMHTE-24.000MHZ-ZK-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices used to produce periodic electrical signals whose frequency can be accurately controlled. ASTMHTE-24.000MHZ-ZK-E-T3 is a type of oscillator. This article will discuss the application field and working principle of ASTMHTE-24.000MHZ-ZK-E-T3.

The application field of ASTMHTE-24.000MHZ-ZK-E-T3 includes, but is not limited to, devices used in automation and detection systems, communications systems, radar systems, and electronic displays.

In terms of working principle, ASTMHTE-24.000MHZ-ZK-E-T3 is a voltage-controlled oscillator (VCO) device. It consists of a voltage-controlled oscillator (VCO) circuit, an external crystal oscillator frequency reference, and a frequency divider. The VCO circuit consists of an amplifier and a varactor diode. The external reference oscillator, consisting of a frequency-stable quartz crystal, is connected to the frequency divider by a low-pass filter. The frequency divider divides the output of the frequency-stable crystal by an amount determined by the logic signals fed into the frequency divider\'s control port.

The frequency of the output of the VCO is determined by adjusting the applied voltage to the varactor diode. The frequency of the output of the VCO can be adjusted by varying the bias voltage on the varactor. The voltage-controlled oscillator is then frequency-locked to the constant frequency signal of the external reference oscillator through the action of the low-pass filter.

A power amplifier stage is incorporated into the oscillator circuit to provide additional gain for larger output signals. The amplifier stage also drives higher load changes that may be needed in specific applications. Power amplifiers are usually added to eliminate frequency swings and introduce a stable signal to the frequency divider.

In conclusion, ASTMHTE-24.000MHZ-ZK-E-T3 is a voltage-controlled oscillator which can be used in automation and detection systems, communications systems, radar systems, and electronic displays. It consists of a voltage-controlled oscillator circuit, an external crystal oscillator frequency reference, a frequency divider, and a power amplifier stage. The frequency of the output of the VCO can be adjusted by varying the applied voltage to the varactor diode. The frequency of the output of the VCO is frequency-locked to the constant frequency signal of the external reference oscillator through the action of the low-pass filter.

The specific data is subject to PDF, and the above content is for reference