ASTMHTE-27.000MHZ-AR-E

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-40°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	27MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Strip

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are fundamental and versatile components used in a wide variety of electronic circuits. Their application ranges from simple clock generators to complex radiofrequency communications systems. One particular type of oscillator is the ASTMHTE-27.000MHZ-AR-E, which stands for Attenuated Sine-Wave Multiharmonic Tuning Element-27.000 Megahertz-Attenuature Ratio-External Input. It is an oscillator designed to produce an output waveform that is rich in harmonics with a controllable attenuature level.The ASTMHTE-27.000MHZ-AR-Eoscillator is designed predominantly for use in radiofrequency communications systems. It provides a steady sinusoidal oscillation output signal at a precise and stable frequency. This signal can then be modulated with data and transmitted through the air to a receiving station. The output signal is rich in harmonics, which helps reduce the amount of noise in the transmission as these higher order frequencies tend to drown out low order noise.The ASTMHTE-27.000MHZ-AR-E uses an assembly of several components and the external input of an analogue signal to produce the signal output. These components include resistors, transistors, capacitors, and inductors. These components are connected in such a way that they form a feedback loop. The main component is an N-channel MOSFET which amplifies the signal and helps to achieve the desired Harmonicity response. The source and drain terminals are connected to a DC voltage source, giving the MOSFET an operating condition. Then a resistor and a capacitor are connected in a feedback loop, and the capacitor voltage is fed to the N-channel MOSFET gates.This circuit causes the operating conditions of the MOSFET to vary. By doing this, the input signal is fed back into the MOSFET gate, and if the correct DC voltage is applied, the circuit will enter into a stable oscillating condition. This stable oscillating output is then fed through the attenuation circuit to achieve the desired attenuation level. The output of the oscillator can then be used directly as an RF signal to transmit radio frequency data.The ASTMHTE-27.000MHZ-AR-E is a very reliable oscillator and has been heavily used for radio transmission systems. It is less expensive than other oscillators with similar capabilities, and provides better harmonic response than other oscillators in its price range. The oscillator is also capable of wide tuning over a large range of frequencies, giving it great flexibility.Overall, the ASTMHTE-27.000MHZ-AR-E oscillator is a reliable and low cost option for a wide range of radio communications applications. Its flexibility and harmonic response make it an ideal choice for any system that requires a steady and stable RF signal.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description