ASTMHTFL-125.000MHZ-XR-E-T3

Oscillators are used in a variety of electronic circuits to produce a constant waveform, such as a sine wave, square wave, or triangle wave. The ASTMHTFL-125.000MHZ-XR-E-T3 oscillator is a three-port device that is classified as a voltage-controlled crystal oscillator (VCXO). This type of oscillator is commonly used for applications where a high level of accuracy and stability is required.

The ASTMHTFL-125.000MHZ-XR-E-T3 oscillator is designed for applications that require a low frequency signal over a wide range of temperatures. It is a low-power, quartz-based oscillator with an stability of ±25 ppm over a temperature range of -40 to +85 degrees Celsius. The device is designed to operate at a frequency range of 125.000 MHz and is highly stable due to its temperature compensation circuitry.

The ASTMHTFL-125.000MHZ-XR-E-T3 oscillator consists of three ports: a control port, a signal port, and a power port. The control port is used to adjust the frequency of the output signal, while the signal port is used to transmit the output signal. The power port is used to supply the device with power and the signal is generated by applying an appropriate voltage and current to the control port. The device also has an onboard temperature sensor that allows it to compensate for changes in the ambient temperature.

The main application of the ASTMHTFL-125.000MHZ-XR-E-T3 oscillator is in the field of telecommunications. It is widely used in radio transmitters, receivers, and other radio communications systems as well as in satellite communications systems. The device is also used in other applications such as navigation systems, radar systems, and instrumentation systems.

The working principle of the ASTMHTFL-125.000MHZ-XR-E-T3 oscillator is based on the piezoelectric effect. When an electrical voltage is applied to the crystal, it causes the crystal to vibrate at a specific frequency. This vibration is amplified and then converted into a radio frequency signal, which is then sent out of the device via the signal port. The control port is used to adjust the frequency of the output signal, allowing the system to remain in lock-step and maintain a constant radio frequency signal.

In conclusion, the ASTMHTFL-125.000MHZ-XR-E-T3 oscillator is a highly stable and accurate device that is widely used in a variety of telecommunications and other applications. It is designed to operate over a wide temperature range while providing a high level of stability and accuracy. The device operates by using the piezoelectric effect to generate a constant waveform, and its onboard temperature compensation circuitry ensures that the output signal remains highly accurate over varying temperatures.