ASTMHTFL-13.000MHZ-ZR-E-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic circuit that produce repeating signals, usually in the form of sine or square waves, called oscillations. The ASTMHTFL-13.000MHZ-ZR-E-T is an example of an oscillator that can be used in a variety of applications.

The oscillator produces a 13 MHz signal of various shapes. The output can be set to have either a sine wave form or a square wave form for various applications. The peak to peak voltage of the output signal can be adjusted from 0 to 3 Volts. The phase noise of the oscillator is better than -100 dBc/Hz at 1 KHz. The output impedance is 50 Ohms and the rise and fall times are faster than 1.5 ns. The temperature stability is 0.5 ppm/°C and the frequency drift over temperature is less than 0.02 ppm/°C.

The ASTMHTFL-13.000MHZ-ZR-E-T can be used for a variety of applications such as cellular network base stations, satellite communications, signal generators, test equipment, and any application requiring a 13 MHz oscillating signal. It is compatible with a variety of microcontrollers, making it an ideal choice for embedded designs. The wide range of frequency management capabilities make it suitable for precision control applications.

The working principle of the ASTMHTFL-13.000MHZ-ZR-E-T is based on a known oscillator property, which is that a positive feedback circuit results in oscillations. In this particular model, the oscillations are generated using a quartz crystal and a phase locked loop circuit. The quartz crystal acts as a filter, passing high frequency signals while rejecting low frequency signals. The phase locked loop then amplifies and reshapes the signals, creating a wave that is suitable for use as an oscillator.

The oscillator’s frequency is determined by the quartz crystal, which is held in place by an adjustment screw or tuning knob. By turning the screw, the user can adjust the frequency of the oscillator. The fine tuning of this oscillator can be done using a voltage regulator and the frequency is then locked in place by a frequency stabilization circuit. The oscillator is also equipped with temperature compensation circuitry, which helps to keep the frequency stable over a wide range of temperatures.

The integrated circuit output stages of the oscillator provide a high voltage output signal with low noise levels. The output stages are protected against excessive current and voltage surges, ensuring reliable operation of the oscillator.

The ASTMHTFL-13.000MHZ-ZR-E-T is an excellent choice for applications where accuracy and stability are required. Its wide range of frequency management capabilities, low power consumption and temperature stability make it a great choice for various applications.

The specific data is subject to PDF, and the above content is for reference