ASTMHTFL-16.000MHZ-ZJ-E-T

Oscillators - ASTMHTFL-16.000MHZ-ZJ-E-T Application Field and Working Principle

Oscillators are electrical devices that generate repetitive electrical signals. ASTMHTFL-16.000MHZ-ZJ-E-T is a type of quartz oscillator which has a significant importance in the electronics industry. They are widely used components in various electronic applications such as radios, TVs, watches, computers, and telecom systems. The quartz oscillator is a relatively small device consisting of a quartz crystal, a pair of electrodes, along with circuits to amplify and shape signals into a predictable waveform.

Application Field of ASTMHTFL-16.000MHZ-ZJ-E-T Oscillator

ASTMHTFL-16.000MHZ-ZJ-E-T oscillators are commonly used in radio frequency (RF) applications, specifically for transmitting and receiving signals. They are used in radios and television receivers, both for broadcasting and reception. They are also used in the mobile communications such as cellular phones and in satellite communications. The quartz oscillator is also used in digital signal processing, as in the form of digital clock generation.

Arrays of quartz oscillators are used in navigation systems such as the GPS. They are used to detect the signals from the satellites and to determine the exact position and time of the individual satellites. The globally available GPS signals, which consist of synchronized 20.2 MHz carrier waves, are detected and synchronized by quartz oscillators in the receivers.

Quartz oscillators are also used in military applications such as guidance systems, missiles, and sonar systems. The exact timing of the signals transmitted by the oscillators is critical for navigation and target acquisition systems.

The quartz oscillators are also used in oscilloscope systems, measuring instruments, and systems for testing electronics components. These oscillators form an integral part of measurement systems in industry. Furthermore, they are used in healthcare instruments such as heart moniotors, laboratory equipment such as spectrometers, and in many other consumer electronic applications.

Working Principle of the ASTMHTFL-16.000MHZ-ZJ-E-T Oscillator

The ASTMHTFL-16.000MHZ-ZJ-E-T oscillator is based on a quartz crystal that vibrates at a specific frequency. This vibrational frequency is determined by the physical dimensions of the quartz crystal. The crystal can be thought of as a small vibrating tuning fork, which is electrically excited. As the crystal vibrates, an electrical signal is generated at a specific frequency.

The electrical signal generated by the quartz crystal is amplified and shaped using an amplifier or a filter. The amplified signal is then connected to an output circuit that provides a suitable output. The oscillator is designed to generate an output of specific frequency [source: Electronic Products.com].

The ASTMHTFL-16.000MHZ-ZJ-E-T oscillator has a temperature range of -10 to +60 degree Celsius, and an operating voltage range of 2.0V to 3.6V. The operating frequency range of the oscillator is 16.000 to 16.015 MHz. The frequency stability of the oscillator is ±20 ppm or better, and the phase noise is -125 dBc/Hz or better. The output level of the oscillator is typically around 0.9Vpp at an operating temperature of 25 degrees Celsius.

Conclusion

The ASTMHTFL-16.000MHZ-ZJ-E-T oscillator is a device used to generate periodic electrical signals. It is primarily used in radio frequency applications, such as in broadcast and reception systems, GPS receivers, and various consumer electronics applications. The oscillator operates on the principle of a quartz crystal vibrating at a specific frequency, which is then amplified and shaped to generate an electrical output signal. The frequency stability and low noise of the device make it an ideal choice for applications where precision and accuracy are required.