ASTMHTV-120.000MHZ-ZR-E-T3

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.039" (1.00mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	--
Operating Temperature:	-55°C ~ 125°C
Series:	ASTMHT
Voltage - Supply:	2.25 V ~ 3.63 V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	120MHz
Type:	MEMS (Silicon)
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

The ASTMHTV-120.000MHZ-ZR-E-T3 is a type of oscillator, which is commonly used in many applications. An oscillator is an electrical circuit that can generate an alternating current signal at a specific frequency. It does this by taking a small amount of power from a voltage source, and then converting it into an alternating current.The ASTMHTV-120.000MHZ-ZR-E-T3 oscillator can be used in many applications, such as radar, transmission, and navigation systems, or in any system requiring precise timing and control. It can also be used in frequency synthesizer circuits, to generate signals of specific frequencies.The ASTMHTV-120.000MHZ-ZR-E-T3 oscillator has several distinct advantages over other types of oscillators. It has an especially high operating frequency range, and is also designed to reduce phase noise, and harmonic distortion. This means that it can produce higher quality signals, and is able to function at higher frequencies with greater accuracy.The ASTMHTV-120.000MHZ-ZR-E-T3 oscillator is composed of two main parts. The first is the tuning diode, which is used to stabilize the frequency of the oscillator. The tuning diode acts as a filter, allowing signals of only the desired frequency to pass while filtering out other frequencies. The second part is the amplifier, which increases the voltage of the signal output from the tuning diode to the desired level, and also adjusts the frequency of the signal.The tuning diode is set to an initial value by the user, and can be adjusted while the oscillator is running. A feedback loop is used to lower the frequency of the oscillator if it gets too high, and a separate control circuit is used to increase or decrease the frequency. When the desired frequency has been reached, the tuning diode becomes saturated, and the oscillator is said to be in "lock".The output from the ASTMHTV-120.000MHZ-ZR-E-T3 oscillator is then typically passed through an amplifier, and then through a filter network before being sent to its destination. The function of the filter is two-fold. First, it can be used to reduce the level of noise in the signal, and second it can be used to adjust the bandwidth of the signal, allowing only the desired frequencies to pass through.The ASTMHTV-120.000MHZ-ZR-E-T3 oscillator is a reliable and accurate oscillator, and can be used in a variety of applications. Its high operating frequency range, low phase noise, and low harmonic distortion make it an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description