ASTMK-4.096KHZ-MP-DCC-J-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are vital electronic components used to create electrical periodic signals. An oscillator consists of an amplifier, a filter, and resonator that shape the generated signal. This article will examine the ASTMK-4.096KHZ-MP-DCC-J-T oscillator, its application field, and its working principle.

The ASTMK-4.096KHZ-MP-DCC-J-T is an oscillator specifically designed for thin film, direct current-coupled logic. This oscillator uses an integrated circuit chip to provide both frequency selection and frequency stabilization accuracy. A resistor, the set resistor, is used to determine the oscillating frequency. The IC’s supply voltage is provided through a hooked diode and a setting capacitance is added for damping tools.

This oscillator features a wide operating temperature range from -20°C to +70°C and a low power consumption rate of less than 3mW. It has a pulse width of 20ms and is characterised by a low harmonic rich oscillation waveform. The frequency stability of this oscillator is acquired by its integrated circuit structure. It has a low input current requirement of 10 to 300mA and its output signal is syncronised by the phase-locked loop of the circuit.

The main application field of the ASTMK-4.096KHZ-MP-DCC-J-T oscillator is for thin-film DC-coupled logic devices such as gate arrays, ASICs, and micro-computers. It is also found in high voltage DC-DC converters, micro-electronic based automatic speed controllers, and active filters. This oscillator is typically used in monitoring systems, medical instrumentation, and communication applications.

The working principle of the ASTMK-4.096KHZ-MP-DCC-J-T oscillator involves an oscillating signal which is generated through an amplifier, filter, and resonator controlled by the integrated circuit chip. The set resistor is used to adjust the oscillating frequency and the setting capacitance is used to dampen the swinging. A hooked diode is used to provide the supply voltage for the IC and the oscillation frequency is stabilized by the PLL circuit. The main components of this device include an amplifier, a filter, a resonator, a hooked diode, a set resistor, and a setting capacitance.

In conclusion, the ASTMK-4.096KHZ-MP-DCC-J-T is an oscillator designed for thin film DC-coupled logic devices. This device has a wide operating temperature range, low power consumption, and excellent frequency stability. The device is mainly used in monitoring systems, medical instruments, and communication applications. Its working principle involves an amplifier, filter, and resonator controlled by an integrated circuit, while the set resistor and setting capacitance are used to adjust the signal.

The specific data is subject to PDF, and the above content is for reference