ASTMUPCD-33-10.000MHZ-EY-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electronic components that generate periodic electronic signals, and the ASTMUPCD-33-10.000MHZ-EY-E-T3 is one of many available oscillators on the market. This oscillator is a miniature temperature-compensated crystal oscillator (TCXO). It is widely used for applications such as frequency references, radio frequency (RF) sources in communication and telemetry systems, as well as radio receiver reference sources.

The main purpose of the ASTMUPCD-33-10.000MHZ-EY-E-T3 is to provide frequency stability with controlled parameters like frequency, amplitude, and phase along with linear temperature characteristics. It is designed to maintain stable output frequency within the range of 0°C to +70°C operating temperature. The ASTMUPCD-33-10.000MHZ-EY-E-T3 also has the capability to adjust frequency correction in either type D or E mode—E mode is much more accurate, with a frequency tolerance of only ±2.0ppm (±10Hz).

In order to understand how the ASTMUPCD-33-10.000MHZ-EY-E-T3 works, one must first understand the basics of oscillators. An oscillator is essentially a device that converts energy into signals with an alternating polarity, usually through the use of an amplifier and circuit. The output of an oscillator is called an oscillator signal, and it looks like a wave with a defined starting point and a defined frequency. The ASTMUPCD-33-10.000MHZ-EY-E-T3 works by converting energy from an external power supply into voltage-controlled oscillator signals with a frequency of 10MHz.

The ASTMUPCD-33-10.000MHZ-EY-E-T3 uses a temperature-compensated frequency circuit (TCF) to eliminate temperature-induced discontinuities in frequency. The TCF works by using a crystal oscillator that is connected to a phase-lock loop (PLL) and a temperature-sensing element. The PLL is used to synchronize the crystal and temperature-sensing elements in order to maintain a stable output frequency. When the temperature of the oscillator changes, the output signal is adjusted to compensate. This ensures that the oscillator maintains its output frequency within the predetermined tolerance of ±2.0ppm (±10Hz).

The ASTMUPCD-33-10.000MHZ-EY-E-T3 can be used in a wide range of applications. It is commonly used as a reference frequency source in telecommunications and telemetry systems, and as a frequency source for radio receivers and radios. It is also used as an aid in navigation and timing systems, as well as radar systems. Furthermore, it is often used to monitor the performance of medical equipment, such as heart monitors and scanners.

In summary, the ASTMUPCD-33-10.000MHZ-EY-E-T3 is a temperature-compensated crystal oscillator (TCXO) designed to maintain stable output frequency within a range of 0°C to +70°C. It uses a temperature-compensated frequency circuit (TCF) to eliminate temperature-induced discontinuities in frequency, and has a frequency tolerance of ±2.0ppm (±10Hz). The ASTMUPCD-33-10.000MHZ-EY-E-T3 is commonly used in telecommunications and telemetry systems, radios, navigation and timing systems, and medical equipment.

The specific data is subject to PDF, and the above content is for reference