ASTMUPCD-33-24.000MHZ-EJ-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical components that generate a periodic, oscillating signal for many applications. One of the most common oscillators is the ASTMUPCD-33-24.000MHZ-EJ-E-T3. This oscillator is widely used in many applications, including telecommunications, software GPS, and metering. It is also used in the manufacturing of integrated circuits, as well as in the production of wireless communications products.

The ASTMUP CD-33-24.000MHZ-EJ-E-T3 is a dual-frequency Voltage Controlled Crystal Oscillator (VCXO). It consists of a quartz crystal and a varactor diode as a frequency adjusting mechanism. The oscillator is designed to provide high frequency stability and good spectrum purity. Its frequency stability is specified by a PPM range of +/− 0.3 to 0.6. It also has a frequency drift of 3 e-4/°C over a range of -20°C to +75°C. The typical phase noise of the ASTMUP CD-33-24.000MHZ-EJ-E-T3 is -112 dBc/Hz at 10kHz frequency offset.

The ASTMUP CD-33-24.000MHZ-EJ-E-T3 has many applications. It can be used as a local oscillator in a Direct Digital Synthesizer (DDS) for arbitrary frequencies, with a frequency range of 5 MHz to 25 MHz. It can also be used as a reference frequency for phase locked loops (PLLs) when it is needed to provide an accurate frequency reference. When used with external signal sources, it can be used to generate precise frequencies for telecommunications, GPS, and metering applications.

In addition, the ASTMUP CD-33-24.000MHZ-EJ-E-T3 can be used as a frequency doubler for frequency synthesizers used in radios, television, and data communications. Its stability makes it an ideal oscillator for test and measurement applications, such as spectrum analysis, frequency synthesis, and pulse shaping. Furthermore, it can be used to generate submicrosecond pulses for logic circuits, as well as for digital timing and control.

The working principle of the ASTMUP CD-33-24.000MHZ-EJ-E-T3 is relatively simple. A quartz crystal is used to generate a frequency of oscillation. The crystal is connected to a varactor diode, which acts as a frequency adjuster. The varactor diode changes the capacitance of the oscillator circuit, which in turn changes the output frequency of the oscillator. When a pulse is applied to the oscillator, the frequency of the output will change proportional to the pulse. This allows the oscillator to be tuned to a specific frequency.

The ASTMUP CD-33-24.000MHZ-EJ-E-T3 is a versatile oscillator that can be used in a variety of applications. It is extremely stable and provides high frequency stability and good spectral purity. It is well suited for precision timing, frequency synthesis, and measurement applications. Additionally, it can be used for a variety of digital timing and control applications.

The specific data is subject to PDF, and the above content is for reference