ASTMUPCD-33-75.000MHZ-EJ-E-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic device, often found in radio communication technology, that generate an oscillating signal. An oscillator, such as ASTMUPCD-33-75.000MHZ-EJ-E-T, is typically used for frequency control and stabilization, frequency synthesis, and modulation.

The ASTMUPCD-33-75.000MHZ-EJ-E-T oscillator is a quartz crystal oscillator designed to operate in the 75MHz frequency range. It is a widely-used type of oscillator, used in a variety of applications including digital circuitry, radio-frequency communication systems, and consumer electronics.

The ASTMUPCD-33-75.000MHZ-EJ-E-T is a low-power oscillator device that can operate over a wide temperature range. It is used in many applications where precise frequency control is required, such as frequency control of a transmitter or receiver. It is also frequently used in timing circuits and signal generators.

The ASTMUPCD-33-75.000MHZ-EJ-E-T oscillator works by creating an alternating electric signal comprised of two sine waves with the same frequency and opposite phases, known as a “quadrature wave.” The frequency of the oscillation is determined by the material properties of the quartz crystal, which is cut at a specific angle creating a specific frequency. This frequency is used to control the operation of the oscillator circuit.

The oscillator’s output signals are generated by passing a current through the quartz crystal, which causes the crystal to vibrate at a specific frequency determined by its material properties. The vibration is then amplified and passed to other circuitry within the oscillator. This amplified signal is then used to control the frequency of the current passing through the crystal.

The frequency of the crystal can be adjusted by applying a small voltage across it. This voltage causes the crystal to vibrate at a slightly different frequency, which is then passed to the other circuitry of the oscillator. This frequency adjustment can be used to adjust the output frequency of the oscillator to match the desired frequency, such as the frequency of the transmitting or receiving device.

The ASTMUPCD-33-75.000MHZ-EJ-E-T oscillator is one of the most widely-used types of oscillators, used in many different applications. As it offers precise frequency control over a wide temperature range, it is often used in radio and communication systems, consumer electronics, and a variety of digital circuits.

The specific data is subject to PDF, and the above content is for reference