ASTMUPCE-33-106.250MHZ-EJ-E-T3

Frequency Stability:	±20ppm
Current - Supply (Disable) (Max):	31mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	36mA
Operating Temperature:	-20°C ~ 70°C
Series:	ASTMUPC
Voltage - Supply:	3.3V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	106.25MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

ASTMUPCE-33-106.250MHZ-EJ-E-T3 is an oscillator that works within a particular frequency range. The device is designed to generate a stable frequency from a voltage source, and is used in a wide variety of applications, such as wireless communication, consumer electronics, medical imaging, and telecom equipment. In this section, we will look at the applications and working principle of the oscillator.

Application

The ASTMUPCE-33-106.250MHZ-EJ-E-T3 oscillator is widely used in communications systems, including wireless, as it provides a stable frequency source for base stations, mobile phones, and other devices. It is also used in consumer electronics such as televisions and radio receivers, providing a reference frequency for accurate timing and synchronization. In medical imaging systems, the oscillator can be used to regulate the ultrasound imaging pulse. In addition, it is used in telecom equipment where a stable frequency source is necessary for timing and synchronization, such as in switching and access systems.

Working Principle

The ASTMUPCE-33-106.250MHZ-EJ-E-T3 oscillator works by generating an AC signal from a DC voltage source. The signal is then fed through a quartz crystal to provide an extremely stable frequency reference. The crystal acts as a filter, allowing only a single frequency to be generated. The frequency can be tuned by changing the DC voltage, allowing for accurate control of the output frequency.The oscillator is also designed to produce a sinusoidal waveform with high harmonic suppression. This ensures that the signal does not interfere with any other signals in the environment, and also reduces the amount of power required to generate the frequency. The oscillator also includes a power ramp feature which allows a gradual increase in power usage over time to reduce any sudden changes.

Conclusion

The ASTMUPCE-33-106.250MHZ-EJ-E-T3 oscillator is a reliable, stable frequency reference used in a wide variety of applications. It is used to generate a single frequency from a voltage source, and provides a sinusoidal waveform with low harmonic noise. The power ramp feature ensures a gradual increase in power usage over time, helping to reduce sudden changes. By understanding how this device works, it is possible to utilize its advantages in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description