ASTMUPCE-33-3.6864MHZ-LY-E-T3

Oscillators

An oscillator is any device or system that produces a periodic, oscillating electronic signal, often a sine wave or a square wave. Oscillators convert direct current (DC) from a power supply to an alternating current (AC) signal. They are widely used in many electronic devices including radios, televisions, computers, cell phones, audio systems, and many more. Some oscillators are designed to produce two or more frequencies or a continuous sweep from one frequency to another. The most common type of oscillator is the crystal oscillator, which uses a quartz crystal as its resonator.

ASTMUPCE-33-3.6864MHZ-LY-E-T3 Application Field and Working Principle

The ASTMUPCE-33-3.6864MHZ-LY-E-T3 is a quartz crystal oscillator that is widely used in many different electronic applications. It is capable of supporting frequencies of up to 3.6864 MHz. This oscillator is most commonly used in radio frequency (RF) circuits, including those used in high frequency (HF) communications and other digital electronics applications. It can also be used in timing circuits for clock synchronization, as well as for sampling and analog to digital conversion.

The ASTMUPCE-33-3.6864MHZ-LY-E-T3 oscillator is made of a quartz crystal inside a housing. This crystal acts as the resonator of the oscillator and provides the frequency that is used in the electronic circuit. A circuit is then built around the oscillator, with components such as transistors and capacitors, to create an oscillator circuit. The frequencies of this oscillator can be adjusted by changing the value of the circuit components. The most important factor with the ASTMUPCE-33-3.6864MHZ-LY-E-T3 oscillator is the stability of the quartz crystal resonator.

The oscillator is connected to the circuit using several inputs and outputs, depending on the design of the circuit. It can be connected to a voltage source to provide the necessary power for the circuit, and to the output of the circuit to provide the desired frequency. The other connections are typically used to adjust the amplitude and phase of the signal, to provide better control of the frequency.

The ASTMUPCE-33-3.6864MHZ-LY-E-T3 oscillator is a reliable, stable, and accurate device, and is widely used in many electronic applications. It is the perfect choice for RF circuits, including high-frequency communications and other digital electronics applications. Additionally, it is also used in timing circuits for clock synchronization, as well as for sampling and analog to digital conversion.