ASTMUPCE-33-33.000MHZ-EY-E-T3

Frequency Stability:	±10ppm
Current - Supply (Disable) (Max):	31mA
Height - Seated (Max):	0.032" (0.80mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	36mA
Operating Temperature:	-20°C ~ 70°C
Series:	ASTMUPC
Voltage - Supply:	3.3V
Output:	LVCMOS
Function:	Enable/Disable
Frequency:	33MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to OscillatorsOscillators are electrical circuits that have the ability to generate a repeating signal, usually a sine wave. This signal is used to generate a periodic output voltage or current in order to maintain a constant steady-state. Common applications of oscillators include clocks, timers, switches, and signal generators. Oscillators also serve as frequency references for various control applications in consumer and industrial electronics.One example of an oscillator is the ASTMUPCE-33-33.000MHZ-EY-E-T3 (ASTMUPCE). This oscillator is designed to generate an output frequency of 33.000 MHz. It is a low-cost and energy-efficient solution for a variety of applications. It is also highly reliable and durable, making it ideal for long-term use. Application Fields of ASTMUPCE-33-33.000MHZ-EY-E-T3The ASTMUPCE-33-33.000MHZ-EY-E-T3 is used in a variety of applications. It is commonly used in industrial and medical control systems, such as medical imaging, machine monitoring, and factory automation. It is also used in communication systems, such as base stations, satellites, and cell phone networks. This oscillator is especially suitable for applications that require a highly stable frequency, such as scientific instruments.Working Principle of ASTMUPCE-33-33.000MHZ-EY-E-T3The ASTMUPCE-33-33.000MHZ-EY-E-T3 is a type of LC oscillator. The oscillator comprises two main components: an inductor and a capacitor. This inductor-capacitor (LC) network is connected to an amplifier, which amplifies the output signal. The oscillator operates by charging and discharging the capacitor through the inductor. When the inductor is connected to the power supply, it will begin to charge the capacitor with a current proportional to the voltage. This current changes the magnetic field of the inductor, which in turn changes the magnetic field of the capacitor. This creates a counter-electromotive force, which is opposite to the voltage applied to the inductor.The voltage builds up on the capacitor until it reaches a certain level, after which the current starts to decrease and the voltage of the capacitor decreases. This decrease in the current will cause the voltage to decrease further. This cycle will continue until the voltage drops below a certain level, at which point the current will stop and the voltage will remain at a low level. Once the current has stopped, the capacitor will start to discharge through the inductor. This causes a reversal in the current and voltage, and the cycle will start again. This cycle produces a periodic output voltage, which is used to generate a sine wave.Conclusion The ASTMUPCE-33-33.000MHZ-EY-E-T3 is a type of LC oscillator used in a variety of applications. It is a low-cost and energy-efficient solution for a variety of applications. It is also highly reliable and durable, making it ideal for long-term use. The oscillator works by charging and discharging the capacitor through the inductor, which produces a periodic output voltage that is used to generate a sine wave.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description