ASTMUPCFL-33-10.000MHZ-LY-E-T3

Oscillators

Oscillators are electronic circuits that generate a periodic waveform, usually a sine wave or a square wave. They are widely used in radio, communications, navigation, maritime, industrial and military applications. The most common oscillator type is the ASTMUPCFL-33-10.000MHZ-LY-E-T3 oscillator.

ASTMUPCFL-33-10.000MHZ-LY-E-T3 application field and working principle

The ASTMUPCFL-33-10.000MHZ-LY-E-T3 oscillator is widely used in a variety of applications, including radio frequency (RF), audio and motion control systems. It is designed for oscillating signals in the frequency range of 10.0 MHz and is packaged in a small form factor. It is typically used as a reference frequency source or as an embedded clock in radio, satellite, and mobile communication systems.

This oscillator works on the principle of an LC circuit. It consists of an inductor and a capacitor, both of which are connected in series. When a voltage is applied to the circuit, the capacitor stores energy and the inductor acts as an energy release loop. The capacitor\'s stored energy transfers to the inductor and the inductor\'s energy is discharged back to the capacitor, forming a continuous circle of energy transfer. This results in an oscillating signal with a fixed frequency. The frequency of the oscillator is determined by the inductance and capacitance values of the LC circuit.

The oscillator also contains a number of other components, such as a vibrating crystal, tuned circuit, buffer amplifiers, and temperature sensors, all of which are designed to increase the stability and accuracy of the output signal. The crystal is used to accurately set the frequency of the clock signal, while the tuned circuit is used to compensate for any changes in the supply voltage. Buffer amplifiers are used to eliminate any noise or distortion in the signal. And, finally, the temperature sensors are used to compensate for any temperature change that could affect the oscillation frequency.

An important advantage of the ASTMUPCFL-33-10.000MHZ-LY-E-T3 oscillator is its wide frequency range and high accuracy. It has a frequency range of 10.0 MHz and an accuracy of ±12 to 40 parts-per-million. This ensures that the output signal is accurate and stable over a wide range of operating temperature and supply voltages.

In conclusion, the ASTMUPCFL-33-10.000MHZ-LY-E-T3 oscillator is a highly accurate and reliable oscillator for a wide variety of applications. It is designed for oscillating signals in the frequency range of 10.0 MHz and is packaged in a small form factor. It has a wide frequency range and an accuracy of ±12 to 40 parts-per-million, ensuring accurate and stable output signals over a wide range of operating temperatures and supply voltages.