ASTMUPCFL-33-24.000MHZ-EY-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that generate and maintain a regular, periodic signal, usually without any external input. This signal can be a waveform such as a sine wave, pulse or sawtooth, and is used in most applications involving timing or frequency control. One common example of an oscillator is an electronic circuit which is built around an amplifier and a resonator such as a crystal or inductor/capacitor circuit (LC circuit). This type of circuit is known as an LC oscillator or tank circuit.

ASTMUPCFL-33-24.000MHZ-EY-E-T3 is an oscillator device designed to create a sine wave of 24 MHz. It is an active crystal oscillator, meaning that an amplifier is used to boost the amplitude of the signal generated by the crystal. The crystal in this type of oscillator is often referred to as the tank circuit, while the amplifier serves as the feedback to ensure signal stability.

The ASTMUPCFL-33-24.000MHZ-EY-E-T3 is designed for use in a wide range of electronic devices. It is a low-cost solution for applications such as metering, medical imaging, microwave communication, and automotive electronics. It is ideal for use in battery-powered systems, since it does not draw much power. Additionally, its compact size and low weight make it easy to install and transport.

The core of the ASTMUPCFL-33-24.000MHZ-EY-E-T3 oscillator is an oscillator circuit consisting of the crystal, amplifier, and feedback components. The crystal is a quartz crystal which is cut to a specific frequency, in this case 24 MHz. The amplifier is typically a transistor or similar device which amplifies the signal emitted from the crystal. The feedback component is typically a resistor, capacitor, or other circuit element which modifies the waveform generated by the crystal so that it can be controlled.

Once the oscillator circuit is assembled, the signal generated by the crystal is fed back to the input of the amplifier. This causes the amplifier to amplify the signal, which is then fed back to the crystal. This feedback cycle creates a steady sine wave with a frequency equal to that of the crystal, in this case 24 MHz. The voltage and/or current of the waveform can then be adjusted by varying the values of the feedback components.

The ASTMUPCFL-33-24.000MHZ-EY-E-T3 oscillator is capable of providing very stable, accurate signals over a wide range of frequencies. Its small size and low power consumption make it ideal for use in a variety of applications. With the addition of a low-cost crystal, it can be used to generate extremely precise oscillations at frequencies ranging from a few kilohertz to several megahertz.

The specific data is subject to PDF, and the above content is for reference