ASTMUPCV-33-155.520MHZ-LY-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic components that are found in a wide variety of electronic devices, such as radios, cellular phones, computers, and clocks. They generate a signal that has a sinusoidal waveform and is used to create precise timing, alarms, or sound, depending on the application. Oscillators are used to regulate the frequency and voltage of a digital circuit, and to generate an AC signal from a DC power supply.

The ASTMUPCV-33-155.520MHZ-LY-E-T3 is an oscillator. It is a voltage-controlled oscillator (VCO) that can be used in a variety of applications, from radio frequency identification (RFID) to wireless communications. The VCO is based on an integrated circuit (IC) that contains an oscillator, an amplifier, and other components that are configured to provide an accurate and stable frequency. The oscillator can be used to generate frequencies from 200 kHz to 180 MHz.

The ASTMUPCV-33-155.520MHZ-LY-E-T3 is designed for low-noise, low-power operation, and its output is designed to maintain a constant frequency over long periods of time. The oscillator is also designed to be reliable and robust, and is able to achieve a maximum frequency deviation of around 2 ppm (parts per million). The wide frequency range of the VCO and its robust design make it suitable for a variety of applications, including medical and industrial applications. In addition, it can operate in temperatures ranging from -55°C to 85°C.

The working principle of the ASTMUPCV-33-155.520MHZ-LY-E-T3 is based on the principle of an oscillator circuit. The frequency of the oscillator is determined by the capacitance of an external capacitor. An external voltage, or control voltage, is used to vary the frequency of the oscillator. The control voltage is applied to the gate of a MOSFET, which is used as a voltage-controlled capacitance element. This modulates the frequency of the oscillator, allowing the output frequency of the oscillator to be varied, depending on the external voltage.

The VCO also has an amplifier stage, which amplifies the output signal. This signal is then output as an amplified sine wave. The signal can also be buffered, filtered, and shaped as needed, depending on the application. The integrated circuit also contains a bias circuit that provides the bias current to the gate of the MOSFET, and a power supply for the circuit. The power supply can be either a battery or an external power source.

The ASTMUPCV-33-155.520MHZ-LY-E-T3 is a highly reliable oscillator and can be used in a wide variety of applications. The wide operating temperature range, low power consumption, and robust design make it suitable for applications in industrial, medical, and consumer electronics. The oscillator\'s frequency range of 200 kHz to 180 MHz, and its wide frequency range enables it to be used in a variety of applications, including RFID, cellular base stations, and wireless communications.

The specific data is subject to PDF, and the above content is for reference