ASTMUPLPE-125.000MHZ-LY-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are a type of electronic circuit that produces a continuous output signal. ASTMUPLPE-125.000MHZ-LY-E-T3 is an example of such a device, which offers a range of application fields and a distinctive working principle.

ASTMUPLPE-125.000MHZ-LY-E-T3 is a type of crystal oscillator which uses a quartz crystal to produce a stable frequency output signals. Generally, this type of oscillator offers high stability and stringent accuracy over a wide temperature range. Such oscillators can operate within accuracy rated in parts per million. It has two modes of operation: frequency control and frequency selection. The oscillator can be adjusted to produce specific output frequencies by varying the oscillation frequency of the crystal.

The application fields of ASTMUPLPE-125.000MHZ-LY-E-T3 includes digital PLLs (Phase Locked Loop), digital signal processing, reference clock generation, analog frequency synthesizers, and control systems. The high stability of these oscillators allows for precise time keeping and synchronization between components and circuits. The quartz crystal can be used to create precise frequencies up to 125 MHz, allowing for frequent and accurate data transfers in various systems.

The operations of ASTMUPLPE-125.000MHZ-LY-E-T3 relies on a feedback loop created by the combination of the quartz crystal and the tuning forks. The crystal is made of quartz and is responsible for the frequency output from the oscillator. When current is applied to the quartz crystal, it vibrates at a predetermined frequency, producing a signal that is fed back into the circuit. The tuning fork is used to control the frequency of the signal by vibrating at the same frequency as the quartz crystal.The output of the feedback loop is then the frequency of the quartz crystal.

The frequency of the oscillator can be manipulated by changing the characteristics of the quartz crystal. Quartz crystals are cut on specific planes along their symmetry axes. These can be cut either in a flat form or in a dome shape. The flat or dome shape of the quartz crystals can be used to tune the oscillation frequency of the crystal. By manipulating the shape and size of the quartz crystal, the frequency output can be adjusted.

The oscillations of the quartz crystal create an alternating electrical signal. This signal is used to generate a square wave or a sine wave, depending on the application that it is being used for. Square waves are useful for digital systems where a constant frequency is required. A sine wave is useful in radio systems for transmitting data and is the most common form of AC electrical current.

ASTMUPLPE-125.000MHZ-LY-E-T3 has a wide range of application fields and a distinctive working principle. It is a type of crystal oscillator which employs a quartz crystal to produce a stable frequency output. Its two modes of operation are frequency control and frequency selection. The frequency can be adjusted by manipulating the shape and size of the quartz crystal. The output of the oscillator is either a square wave or a sine wave, depending on the application. With its comprehensive set of features, ASTMUPLPE-125.000MHZ-LY-E-T3 is an ideal device for numerous oscillator applications, including digital PLLs, signal processing, reference clock generation, frequency synthesizers, and control systems.

The specific data is subject to PDF, and the above content is for reference