ASTMUPLPFL-125.000MHZ-LJ-E-T3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators have been around since the late 19th century and have been used in a variety of applications. Many oscillators are based on the use of an amplifier, which creates an output signal based on the input signal, and a feedback loop that allows the output signal to be compared with the input to create an oscillation. The ASTMUPLPFL-125.000MHZ-LJ-E-T3 is a specialized oscillator that operates in this manner.

Developed by the Polygon Corporation in the early 1950’s, the ASTMUPLPFL-125.000MHZ-LJ-E-T3 is a voltage-controlled oscillator (VCO) suitable for use in radio frequency (RF) applications, such as radio and television broadcast, and telecommunications. The operating range is from 100 MHz to 300 MHz. It is also capable of generating precise pulses as short as 10 microseconds in duration.

The ASTMUPLPFL-125.000MHZ-LJ-E-T3 relies on the principles of electrical resonance to create its oscillations. This involves the use of tuned circuits that allow a specific frequency to be amplified. This resonance is known as “self-oscillation” and is used to create the oscillations. In the case of the ASTMUPLPFL-125.000MHZ-LJ-E-T3, an amplifier circuit is used in conjunction with the tuned circuits, allowing for up to a 5-volt control voltage.

In order to ensure precise pulse widths, a linear ramp generator is used. This produces a four-stage ramp signal in order to precisely place the timing of the pulses. Additionally, a voltage-controlled capacitor is used to ensure a precise frequency response. This allows for precise frequency control of the oscillator.

One of the primary advantages of the ASTMUPLPFL-125.000MHZ-LJ-E-T3 is its low power consumption, as compared to other oscillators of its type. It is highly efficient and has a minimal power consumption of only 15 mW. This makes it well-suited for portable or battery-powered devices.

The ASTMUPLPFL-125.000MHZ-LJ-E-T3 is primarily used in applications where a high level of reliability and accuracy is needed. This oscillator is thus well-suited for use in broadcast, television, and telecommunications systems. Additionally, it can be used in laboratory settings as a reliable source of low frequency signals. In some cases, it may also be used to generate precise timing signals for triggering devices such as plotting and printing systems.

As a high-performance oscillator, the ASTMUPLPFL-125.000MHZ-LJ-E-T3 is capable of providing highly reliable signals with a high level of accuracy. By using a linear ramp generator, precise pulse widths can be obtained. Additionally, the use of a voltage-controlled capacitor allows for precise frequency control. All these features make the ASTMUPLPFL-125.000MHZ-LJ-E-T3 an excellent choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference