ASVMPC-11.0592MHZ-LR-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices used to generate a signal in a continuous wave form with frequency stability. ASVMPC-11.0592MHZ-LR-T is one of the oscillators available in the market. This oscillator is highly suitable for applications requiring low power, small form factor and minimal quartz crystal requirements.

ASVMPC-11.0592MHZ-LR-T is composed of an active region as well as inductor, capacitor and resistors. The active region is composed of a voltage controlled oscillator (VCO), while the passive elements provide frequency control. The active region of the oscillator consists of an operational amplifier (OPAMP) and voltage regulator, which works in constant duty cycle mode. The VCO produces a signal with an amplitude that is proportional to the input voltage. The VCO is coupled to the output stage, which consists of an amplifier and a filter. The amplifier amplifies the signal of the VCO to the desired output amplitude. The filter removes harmonics from the signal, allowing it to better meet the desired spectral profile. At the same time, the filter also blocks frequencies outside of the desired operating frequency range.

The ASVMPC-11.0592MHZ-LR-T oscillator has a variety of applications. It can be used for timing control in desktop computers, industrial systems, automotive, telecommunications and audio/video systems. It is also widely used in consumer electronics such as CD players, portable audio players, radios, and televisions. ASVMPC-11.0592MHZ-LR-T is also suitable for applications requiring low-phase noise, such as wireless communication, satellite systems, and navigation systems. In such applications, the low noise allows for high quality signal transmission over long distances and in a range of conditions.

The operating principle of the ASVMPC-11.0592MHZ-LR-T oscillator is based on the principle of controlled switching. Initially, the oscillator is powered up, and a high frequency clock signal is applied to the input. The clock signal is then filtered and amplified through a series of active and passive components. The filtered signal then passes through the VCO. As the input voltage varies, the frequency of the signal output produced by the VCO also changes. The filtered and amplified signal is then passed through a filter to remove any harmonics. The filtered signal is then sent to the output stage, where it is further amplifed and filtered to generate the desired signal. Thus, the ASVMPC-11.0592MHZ-LR-T oscillator produces a stable frequency with minimal power consumption, making it highly suitable for a variety of applications requiring low power and/or minimal frequency variation.

The specific data is subject to PDF, and the above content is for reference