AT-10.000MAGI-T Crystals, Oscillators, Resonators |
|
Allicdata Part #: | 887-1600-2-ND |
Manufacturer Part#: |
AT-10.000MAGI-T |
Price: | $ 0.27 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | TXC Corporation |
Short Description: | CRYSTAL 10.0000MHZ 16PF SMD |
More Detail: | 10MHz ±30ppm Crystal 16pF 70 Ohms HC-49/US |
DataSheet: | AT-10.000MAGI-T Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.23625 |
Series: | AT |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 10MHz |
Frequency Stability: | ±50ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 16pF |
ESR (Equivalent Series Resistance): | 70 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | AEC-Q200 |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.449" L x 0.189" W (11.40mm x 4.80mm) |
Height - Seated (Max): | 0.161" (4.10mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystal: AT-10.000MAGI-T Application Field and Working Principle
Crystals are important building blocks of modern electronic systems. AT-10.000MAGI-T is a type of crystal oscillator which is increasingly used in many electronic circuit applications. It offers various benefits such as low power consumption, high stability, and accuracy. This article will discuss the application field and working principle of AT-10.000MAGI-T.
AT-10.000MAGI-T is a high-frequency quartz crystal resonator used in precision timing applications. It has a wide frequency range of 2 to 12MHz and an excellent temperature stability over wide temperature ranges. It is commonly used in oscillators, precision frequency dividers, clock isolation circuits, and delay line clock circuits. The crystal is also suitable for oscillator circuits in which the highest frequency accuracy is required. These include frequency synthesizers, multivibrator circuits, phase-locked loops, and frequency-controlled transmitters.
The AT-10.000MAGI-T is capable of providing excellent timekeeping performance due to its great accuracy and low temperature and humidity dependence. Compared to other types of crystals, it offers greater accuracy, stability, and wide temperature range. The crystal is also free from hysteresis, so that it can maintain its accuracy even after multiple power cycles. This makes it ideal for use in critical timing applications.
The working principle of the AT-10.000MAGI-T is based on the forced vibration of the quartz crystals. In an oscillator circuit, an energy source such as a voltage or a current is used to drive the quartz crystal at its resonant frequency f. The frequency at which the crystal oscillates is determined by its geometry as shown in the diagram. When the crystal is driven with an alternating current, the electrons in the crystal lattice move back and forth at a rate determined by the applied frequency. When the applied frequency matches the resonant frequency of the crystal, the crystal vibrates and produces an output signal.
The AT-10.000MAGI-T is a versatile and reliable quartz crystal oscillator and is widely used in many precision timing applications. Its wide frequency range, excellent accuracy and consistent performance make it an ideal choice for applications such as frequency-controlled transmitters, frequency synthesizers, and oscillator circuits. With its great accuracy, stability and reliability, the AT-10.000MAGI-T is a trusted timekeeper and an essential component of modern electronic systems.
The specific data is subject to PDF, and the above content is for reference
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...