Allicdata Part #: | AT-100-(0)-WP1(40)-ND |
Manufacturer Part#: |
AT-100-(0)-WP1(40) |
Price: | $ 90.48 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 0DB |
More Detail: | RF Attenuator 0dB 0Hz ~ 18GHz 50 Ohms 1W SMA In-L... |
DataSheet: | AT-100-(0)-WP1(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 82.25280 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 0dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are components used to reduce the strength of reflected or incident electronic signals. AT-100-(0)-WP1(40) is a variable attenuator from the “plug and play” series, which offers full fiber-coupled multipath performance to a broad range of applications. This attenuator is designed for in-line, multi-mode and single-mode applications and can handle up to 1 W of optical power.
AT-100-(0)-WP1(40) is a 40 dB, high-power, bi-directional, 100 Hz low to medium-power attenuator. It features a rugged stainless steel body and a polyethylene-dielectric, mineral-oil attenuator. The attenuator\'s unique design ensures low insertion losses, low crosstalk, and superior signal integrity. The attenuator\'s low-power capacity also makes it suitable for low-power applications, such as field test equipment.
AT-100-(0)-WP1(40) attenuator was designed for light-emitting diode (LED) application, however its versatility allows it to be used in different field of application. It can be effectively used in wireless systems, power line communication (PLC) systems, low-power test systems, fiber optics/telecommunications systems, digital electronic systems, consumer electronics, and industrial applications.
This attenuator has an operating frequency of 100 Hz with a maximum working voltage of 24 V and a power rating of 40 dB, which is adequate for most frequency applications. The plug and play feature of the attenuator makes it quick to install and easy to use with both new and existing systems. The rugged stainless steel body of the attenuator is designed for long-term stability and prolonged use.
The working principle of the AT-100-(0)-WP1(40) attenuator involves the use of an attenuator element, which is placed in a housing. This element is a thin film of copper on a dielectric material. The attenuator element has two terminals, in which one is the input and the other the output. When an electrical signal is applied to the terminal connected to the attenuator element, the element reduces the signal amplitude as it passes through the element, thus attenuating it to the required level. The attenuator element can be adjusted to provide different levels of attenuation through the application of varying voltages.
The AT-100-(0)-WP1(40) attenuator is a reliable and cost-effective solution for signal attenuation in various applications. It provides superior signal integrity, low insertion losses, and low crosstalk. The attenuator is also quick and easy to install and offers high performance for numerous applications. AT-100-(0)-WP1(40) attenuator is an ideal solution for attenuating signals in various fields, such as wireless systems, power line communication (PLC) systems, low-power test systems, fiber optics/telecommunications systems, digital electronic systems, consumer electronics, and industrial applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...