Allicdata Part #: | AT-1001(40)-ND |
Manufacturer Part#: |
AT-1001(40) |
Price: | $ 305.61 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 1DB |
More Detail: | RF Attenuator 1dB ±0.5dB 0Hz ~ 8GHz 50 Ohms 10W SM... |
DataSheet: | AT-1001(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 277.83000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 8GHz |
Power (Watts): | 10W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are commonly used in different industries for numerous purposes. These range from controlling signals and power levels in communication and industrial control systems, to eliminating or reducing background noise in audio production. The AT-1001(40) is one type of attenuator with a specific application field and working principle.
The AT-1001(40) is designed to be used for attenuation of general purpose DC-DC power supplies. This is useful for a variety of applications, including noise reduction, voltage control, and voltage and power regulation in industrial equipment. It is a highly efficient, reliable, and lightweight attenuator that is easy to install and requires minimal maintenance.
The working principle of the AT-1001(40) is relatively simple. The attenuator is equipped with a series of resistors that provide an impedance level adjustment, allowing for a variation of the output voltage or power supply. This attenuation can be set at a fixed value, allowing for a consistent voltage or power output, or can be manually adjusted depending on the requirements of the application.
Another benefit of the AT-1001(40) is that it can operate in both constant voltage and constant current modes. In constant voltage mode, the fixed value of the selected resistor will cause the output voltage to remain constant, regardless of load fluctuations. In constant current mode, the same resistors will act as a constant current source, limiting the maximum current delivered to the load.
The AT-1001(40) is also commonly used for power supply regulation. As a general purpose attenuator, it can be used to reduce peak power supply voltage or current, but more importantly, it is capable of dynamically responding to load fluctuations. As the load fluctuates, the voltage and current delivered to the load will automatically rise and fall accordingly. This helps to maintain a stable output voltage and current, ensuring that the power supply is able to deliver its maximum rated output and run efficiently.
The AT-1001(40) is ideal for many industrial applications due to its high efficiency and reliability. It is widely used as a general purpose attenuator, as it is simple and cost-effective. It can also be used for power regulation and as a general purpose AC to DC converter. Additionally, its lightweight and easy-to-install construction makes it an ideal solution for integrating into industrial equipment.
In conclusion, the AT-1001(40) is a highly efficient and reliable attenuator with a specific application field and working principle. It is designed to provide a constant voltage or current output depending on the mode selected, as well as to regulate power supply output. This compact and lightweight attenuator is suitable for a variety of industrial applications, due to its ease of installation and minimal maintenance requirements.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...