Allicdata Part #: | AT-101-WP1(40)-ND |
Manufacturer Part#: |
AT-101-WP1(40) |
Price: | $ 90.48 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 0DB |
More Detail: | RF Attenuator 1dB 0Hz ~ 18GHz 50 Ohms 1W SMA In-L... |
DataSheet: | AT-101-WP1(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 82.25280 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An attenuator is an electrical device that reduces the power of a signal without appreciably distorting its waveform. The type of attenuator in use today is the resistive pad. It is simply a network of resistors of equal value connected together to form a network that will reduce the power. The AT-101-WP1(40) attenuator is a resistive pad designed and manufactured by AT-101-WP1 Technologies. It is used in many applications.
The AT-101-WP1(40) attenuator is a passive device that eliminates RF energy from a power source. This type of attenuator is specifically designed for use at radio frequencies up to 40MHz. It has a wide frequency response and low insertion loss. It can attenuate signals up to a maximum of 30dB. The device is constructed using thick film resistors and has an operating temperature range of 0 to 70° C.
The AT-101-WP1(40) attenuator is used in a variety of applications, including industrial, telecommunications, utilities, aerospace, and military. It is used in radio base stations, power supplies, audio systems, and RFID systems. It is used to control RF power levels and protect sensitive circuits. It is also used to reduce the interference generated by a system.
The working principle of the AT-101-WP1(40) attenuator is relatively simple. The device is composed of a series of resistors with the same value, connected together to form a resistor network. The signal is input into the network at the input terminal and is reduced in power as it passes through each resistor. The reduction in power is proportional to the number of resistors in the network. The amount of attenuation of the signal is determined by the ratio of the input and output resistances of the network.
The AT-101-WP1(40) attenuator is a reliable and useful device for controlling and protecting RF power levels. It is simple to use and can limit the amount of RF energy coming from a source. It is also relatively inexpensive and is used in a wide variety of applications. Its wide frequency response and low insertion loss make it an attractive choice for many applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...