Allicdata Part #: | AT-109-WP1(40)-ND |
Manufacturer Part#: |
AT-109-WP1(40) |
Price: | $ 90.48 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 9DB |
More Detail: | RF Attenuator 9dB 0Hz ~ 18GHz 50 Ohms 1W SMA In-L... |
DataSheet: | AT-109-WP1(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 82.25280 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 9dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
AT-109-WP1(40) is a type of attenuators, a family of electronic parts that can reduce the intensity and energy of a signal. It is especially useful in situations where the signal is either too strong or too weak. As its name suggests, AT-109-WP1(40) is rated at 40dB of attenuation, meaning that it can attenuate any signal up to 40 decibels. The AT-109-WP1(40) is commonly used in a wide range of applications, including telecommunications, medical imaging, and radar systems.Attenuators are composed of several components, each of which serve a specific purpose. In AT-109-WP1(40), the primary components are its housing, its resistors, and its terminals. The housing, usually made of plastic or metal, is designed to protect the internal components from damage. Inside the housing, the resistors are designed to reduce the signal’s strength. The terminals provide an entry and exit point for the signal, allowing it to be modified.The working principle of AT-109-WP1(40) is based on the relationship between voltage and current. When a signal is conducted through a resistor, the current and voltage will be reduced, resulting in an attenuated signal. In AT-109-WP1(40), the resistors are arranged in a series configuration, which means that the attenuation increases with each additional resistor. As a result, a signal that passes through AT-109-WP1(40) will be more greatly reduced than one that passes through a single resistor.In addition to being used in telecommunications, medical imaging, and radar systems, AT-109-WP1(40) can also be used in audio systems. When connected in series between two audio components, the attenuator can reduce the signal strength before it reaches the destination. This prevents the two components from being overloaded and ensures that all components are operating at the same level.Finally, AT-109-WP1(40) is also suitable for use in low power radio circuits. When used in such circuits, AT-109-WP1(40) can help reduce interference from nearby radio transmissions. This is because the attenuator will absorb some of the radio signals, meaning less of it will reach the intended radio circuit.In conclusion, AT-109-WP1(40) is a type of attenuator that can be used in a variety of applications, including telecommunications, medical imaging, radar systems, audio systems, and low power radio circuits. It is composed of various components, including its housing, resistors, and terminals. Its working principle is based on the relationship between voltage and current, whereby the signal\'s strength is reduced when it passes through the resistors.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...