Allicdata Part #: | AT-113-WP1(40)-ND |
Manufacturer Part#: |
AT-113-WP1(40) |
Price: | $ 90.48 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 13DB |
More Detail: | RF Attenuator 13dB 0Hz ~ 18GHz 50 Ohms 1W SMA In-... |
DataSheet: | AT-113-WP1(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 82.25280 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 13dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic devices which reduce signal amplitude. The AT-113-WP1 (40) device is one of them and it is widely used for many applications. This article will discuss the application field and working principle of the AT-113-WP1 (40).
Applications
The AT-113-WP1 (40) attenuator can be used in a variety of applications with a frequency range from 10 MHz to 3 GHz. It is used for measurements in diverse areas such as radars, electronic counter-measures system, aerospace communications, navigation systems, communications monitoring, radio engineering, base station installations and land transport. It is also use to reduce mechanical noise in industrial processes.
The AT-113-WP1 (40) attenuator is used in many communications systems, to help maintain the signal quality and improve the signal integrity. It is also used to reduce interference and improve reception quality. As such, it helps to improve the performance of the system, both in terms of signal strength and clarity. The device is also useful for examining the power output of transmitters and amplifiers.
Working Principle
The AT-113-WP1 (40) attenuator works by reducing the amplitude of an incoming signal, but not affecting its waveform. It does this by using resistance. A resistor will lower the voltage of an incoming signal by dissipating the energy. The AT-113-WP1 (40) attenuator is a resistive device which contains four resistors in a precisely matched configuration. The resulting resistance converts some of the incident signal energy into heat, thus reducing the voltage across it.
The voltage attenuation is determined by the ratio of the load resistance to the resistor values, and should be determined according to the power and frequency of the applied signal. The impedance of the device should also be taken into consideration, as this affects its operation. The design of the AT-113-WP1 (40) attenuator is such that its attenuation characteristics remain constant over a wide frequency range.
The AT-113-WP1 (40) attenuator also has a high level of isolation and low noise, ensuring that only the desired signal is passed through. This helps to maintain signal integrity and eliminate interference. The device is also designed for high temperature and weather resistance, making it suitable for use in harsh environments.
Conclusion
In conclusion, the AT-113-WP1 (40) attenuator is a highly versatile device with a wide range of applications in different industries. It is used to reduce signal amplitude while preserving its waveform, and also helps to improve signal strength and clarity. It is designed to operate in demanding environments, with a high level of isolation and low noise for signal integrity. It is an ideal choice for applications in various industry fields.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...