AT-113V

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electronic circuits used to reduce the amplitude or strength of a signal. The AT-113V is a voltage attenuator, which reduces the size of the input voltage. This allows for a range of applications that require precise adjustment, such as audio equipment, voltage converters, and circuit-level protection. In this article, we\'ll discuss the AT-113V application field and working principle.

AT-113V Application Field

The AT-113V is suitable for a variety of applications, including sound equipment, motor controls, and automation systems. It can be used to reduce the incoming voltage so that it is suitable for the specific application. Additionally, it can be used to vary the voltage supplied to the load, which can help protect the circuit from overloads.

AT-113V Working Principle

The AT-113V is a three-resistor network attenuator. It uses three resistors in a “divider” configuration, with each resistor having a designated value. The input voltage is applied across a resistor, which is connected to the output voltage. This output voltage is then divided by the value of the resistors, thus reducing the overall voltage. This circuitry also provides some level of isolation, which is important for avoiding ground loops and other unwanted effects.

The AT-113V is designed to be used with low impedance input voltages, typically up to 10 volts. The exact ratio of voltage reduction is set by the value of the resistors, and can range from 1:1 ratio to 10:1 ratio, or higher. The resistors can be adjusted to achieve the desired voltage reduction. Additionally, the AT-113V can be connected in series with other attenuators to achieve even higher accuracy.

Conclusion

The AT-113V is a three-resistor network voltage attenuator. It is suitable for a range of applications, such as audio equipment, motor controls, and automation systems. It can reduce incoming voltage to a precise level, depending on the resistor values used in its circuitry. This makes it an ideal solution for situations where precise voltage control is needed. With its wide range of applications and accuracy, the AT-113V is a valuable circuit component.

The specific data is subject to PDF, and the above content is for reference