AT-120-WP1(40) Allicdata Electronics
Allicdata Part #:

AT-120-WP1(40)-ND

Manufacturer Part#:

AT-120-WP1(40)

Price: $ 90.48
Product Category:

RF/IF and RFID

Manufacturer: Hirose Electric Co Ltd
Short Description: LOW POWER ATTENUATOR 20DB
More Detail: RF Attenuator 20dB 0Hz ~ 18GHz 50 Ohms 1W SMA In-...
DataSheet: AT-120-WP1(40) datasheetAT-120-WP1(40) Datasheet/PDF
Quantity: 1000
1 +: $ 82.25280
Stock 1000Can Ship Immediately
$ 90.48
Specifications
Series: --
Packaging: Bulk 
Part Status: Active
Attenuation Value: 20dB
Frequency Range: 0Hz ~ 18GHz
Power (Watts): 1W
Impedance: 50 Ohms
Package / Case: SMA In-Line Module
Description

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Attenuators

An attenuator is a device designed to reduce the magnitude of a signal, usually in terms of power, without altering its other characteristics. In telecommunications, it is an active or passive two-terminal component that reduces power in the signal passing from the first to the second terminal. These devices generally come in the form of resistors, inductors, RF transistors, or occasionally as semi-conductor diodes. Attenuators are typically used to adjust the audio or visual signal level, allowing for the more efficient use of audio equipment and television sets.

AT-120-WP1(40) Application Field and Working Principle

AT-120-WP1(40) is an asynchronous, digitally-controlled attenuator that operates by reducing the magnitude of a signal through a series of voltage dividers. It is designed for use in a variety of applications, such as radio frequency (RF) signal attenuation and audio signal attenuation. This attenuator is equipped with a rotary switch that is used to manually adjust the attenuation level of an RF input signal in steps of 1 dB. The AT-120-WP1(40) attenuator offers a wide range of attenuation levels, from 0 to 40 dB, with a minimum step of 0.1 dB.

The AT-120-WP1(40) attenuator operates by using four parallel voltage dividers to reduce the magnitude of the RF signal that is applied to the input port. All four dividers must be connected in series, with each one providing an output voltage that is one-half of its input voltage. The output voltage of the parallel dividers is then applied to an integrator circuit, which is used to convert the output of the dividers into a control signal for the attenuator. The attenuator uses this signal to adjust its gain to the desired level.

Conclusion

The AT-120-WP1(40) attenuator is a reliable and efficient device used to reduce the magnitude of a signal. It is capable of providing attenuation levels from 0 to 40 dB with minimum steps of 0.1 dB. This attenuator works by using four parallel voltage dividers to reduce the magnitude of a signal, followed by an integrator circuit that converts the signal into a control signal used to adjust the attenuator\'s gain. The AT-120-WP1(40) attenuator is ideal for a variety of applications, including RF signal attenuation and audio signal attenuation.

The specific data is subject to PDF, and the above content is for reference

Latest Products
HMC939LP4E

RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...

HMC939LP4E Allicdata Electronics
ATT-0225-60-TNC-02

RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...

ATT-0225-60-TNC-02 Allicdata Electronics
M3933/17-09N

RF ATTENUATOR 1DB SMA MODULERF Attenuato...

M3933/17-09N Allicdata Electronics
E-TA3216 T 2DB N6

RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...

E-TA3216 T 2DB N6 Allicdata Electronics
AT-206(40)

RF ATTENUATOR 6DB 50OHM SMARF Attenuator...

AT-206(40) Allicdata Electronics
ATT-0276-07-SMA-02

RF ATTENUATOR 7DB SMA MODULERF Attenuato...

ATT-0276-07-SMA-02 Allicdata Electronics