Allicdata Part #: | AT-201(40)-ND |
Manufacturer Part#: |
AT-201(40) |
Price: | $ 91.42 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 0DB |
More Detail: | RF Attenuator 1dB ±1dB 0Hz ~ 18GHz 50 Ohms 1W SMA ... |
DataSheet: | AT-201(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 83.10960 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are an important part of electronics, as they help to regulate the delivery of power in a circuit. The AT-201(40) is a particularly useful attenuator in a number of applications. It features an impedance range of 1-1000 ohms with a power gain of up to 40 decibels. In this article we will discuss the applications and working principle of the AT-201(40).
Applications of AT-201(40)
The AT-201(40) is commonly used to control signal levels in electronic circuits and test equipment. It can also be used for setting the input and output level matching of any audio device or component. Additionally, the AT-201(40) can be used for reducing the effects of circuit noise when working with sensitive components. It is also useful for isolating or “balancing” out high frequency signals.
The AT-201(40) is ideal for a variety of applications in aerospace, automotive, marine and military industries. It can also be used for eliminating interference from electromagnetic waves that can disrupt sensitive electronic components. The AT-201(40) is an effective noise filter in environments where there are high levels of electromagnetic radiation, such as medical diagnostics and scanning equipment.
Working Principle of AT-201(40)
The AT-201(40) uses an advanced design to effectively reduce signals in circuits. The device works by passing an electrical signal through two resistors in series. The amount of signal attenuation is controlled by the ratio of the resistance value between the two resistors. The two resistors are connected with a variable potentiometer, so the user can adjust the attenuation of the signal when needed.
The AT-201(40) is also able to provide a certain amount of gain to an incoming signal. This gain is determined by the setting of the variable potentiometer. By adjusting the potentiometer, the user can control the amount of gain provided to a signal. This is why the AT-201(40) can be used both as an attenuator and a gain control device.
In addition, the AT-201(40) can also be used as a signal booster. This is beneficial in situations where the incoming signal needs to be amplified before it is sent to the next stage of the circuit. The amount of boost can be controlled by adjusting the variable potentiometer on the AT-201(40) accordingly.
Conclusion
The AT-201(40) is a versatile and useful attenuator in a variety of applications. It has an impedance range of 1-1000 ohms and a power gain of up to 40 decibels. The AT-201(40) can be used to control signal levels in circuits, provide gain control, or to act as a signal booster. With its adjustable potentiometer, it can be used for a variety of purposes with ease.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...