Allicdata Part #: | AT-204(40)-ND |
Manufacturer Part#: |
AT-204(40) |
Price: | $ 91.42 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 4DB |
More Detail: | RF Attenuator 4dB ±1dB 0Hz ~ 18GHz 50 Ohms 1W SMA ... |
DataSheet: | AT-204(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 83.10960 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used to reduce the amplitude of an incoming signal. An AT-204(40) attenuator is a resistive device composed of a series of fixed resistance elements connected in a ladder like configuration. This component is a four-section, 12-tapped attenuator that uses four series elements. It is designed to reduce a wide range of frequencies in the 0 MHz to 40 GHz frequency band.
The Attenuator 204(40) has two primary applications: signal level adjustment and voltage-controlled signal attenuation. In the first, manufacturers use the component to match output signal levels to input state requirements. This is particularly useful in applications such as radar, component testing, and VCO biasing. In the second application, voltage-controlled signal attenuation, the attenuator is used to adjust the amplitude of the signal as it passes through the device. This can be used to control the power delivered from a transmitter to an antenna, for example, or to adjust the signal strength in more complex radio communication systems.
The AT-204(40) attenuator’s working principle is based on the concept of resistance. Specifically, when an incoming signal is applied to the attenuator, the resistance elements within it cause the signal to decrease in power or amplitude. This reduction in amplitude is determined by the total resistance of the device. The number of resistance elements in the device, their individual resistance values, and their placement in the device all affect the amount of signal dampening that takes place. In addition, the device’s configuration also affects the frequency range of the signal dampening.
The AT-204(40) attenuator is a four-section, 12-tapped attenuator that uses four series elements to reduce a wide range of frequencies from 0 MHz to 40 GHz. It is designed to match output signal levels to input state requirements, as well as to adjust the amplitude of the signal as it passes through the device. The component’s working principle is based on the concept of resistance, with the number of resistance elements, their individual resistance values, and their placement all affecting the amount of signal dampening that takes place. As such, the AT-204(40) is a versatile and highly effective solution for a wide range of signal level adjustment and voltage-controlled signal attenuation applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...