Allicdata Part #: | AT-2202(46)-ND |
Manufacturer Part#: |
AT-2202(46) |
Price: | $ 4.23 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | ATTENUATOR 2DB |
More Detail: | RF Attenuator 2dB ±0.5dB 0Hz ~ 2.5GHz 50 Ohms 1W 4... |
DataSheet: | AT-2202(46) Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 3.84079 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 2.5GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | 4-SMD, No Lead |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
Attenuators are common hardware devices that are designed to reduce the strength of a signal or waveform in order to control signals. They are used in a variety of applications, including radio, medical and telecommunications. The AT-2202(46) is a component of an attenuator, and this article will discuss its application field and working principle.
Application Field
The AT-2202(46) is commonly used in RF applications, where it is used to reduce the strength of radio signals. The device is ideal for areas where signals need to be "stepped down" from their normal strengths, such as in buildings with sensitive electronics equipment, in order to prevent them from overloading and damaging equipment. They are also used in telecommunications applications, such as mobile and satellite communications, where they can be used to reduce signal interference.
Working Principle
The AT-2202(46) works by reducing the input wattage of an RF signal to the desired level before it enters the device. This is achieved by using a combination of resistive and capacitive elements, which are connected in such a way as to reduce the strength of incoming signals. The device can also be used to adjust the impedance match between the signal and the communication device, allowing the signal to be properly transmitted within the system.
The AT-2202(46) is a precision component that is designed to provide accurate and reliable attenuation levels. It is manufactured with precision capacitors and resistors, which ensure that the device will maintain its performance over time. The device is also designed to withstand high levels of RF energy, making it suitable for use in broadcast and telecommunications applications.
Conclusion
The AT-2202(46) is an important component of an attenuator, and is used in a variety of applications, including RF applications and telecommunications applications. The device works by reducing the strength of incoming signals, and can also be used to adjust the impedance match between the signal and the communication device. It is designed to provide high levels of accuracy and reliability, and is manufactured with precision elements to ensure that the device will maintain its performance over time.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...