Allicdata Part #: | AT-2205(40)-ND |
Manufacturer Part#: |
AT-2205(40) |
Price: | $ 9.77 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | ATTENUATOR 5DB |
More Detail: | RF Attenuator 5dB ±0.5dB 0Hz ~ 2.5GHz 50 Ohms 1W 4... |
DataSheet: | AT-2205(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 8.88300 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 5dB |
Frequency Range: | 0Hz ~ 2.5GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | 4-SMD, No Lead |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are control devices used to reduce noise in both analogue and digital signals. The AT-2205(40) is a special type of attenuator which can be used to reduce the electromagnetic noise generated by digital or analogue circuits and lines.
The AT-2205(40) device works by attenuating the electromagnetic noise generated by adjacent circuitry or lines. It is also able to handle higher frequencies of up to 400MHz, making it suitable for controlling higher frequency noise sources. In addition, it can handle signals up to a maximum of 40dBm in power levels.
The AT-2205(40) attenuator works by inserting an inductor between two signal lines and then applying a resistor across the inductor. The inductor combines with the resistor to create an effective electromagnetic shield that will attenuate any electromagnetic noise generated by the circuit. The higher the value of the inductor, the greater the amount of noise which can be attenuated.
The AT-2205(40) attenuator is ideal for applications such as controlling EMI (electromagnetic interference) generated by consumer electronics, controlling interference in radio receivers, improving the signal-to-noise ratios of audio amplification systems and suppressing RF(radio frequency) interference in communication systems. It is also useful in controlling noise generated by automotive systems, such as engine control units and fuel injection systems. It is also widely used in industrial control systems, including operation control panels and automated testing systems.
The AT-2205(40) attenuator is comprised of an inductor, two shielded cables, and a resistor. The inductor is designed to reduce the signal amplitudes of the incoming signals, while the resistor ensures that the outgoing signal is attenuated by a specific amount. This combination of the inductor and resistor creates an effective electromagnetic shield which will reduce the levels of noise from the circuit.
The AT-2205(40) attenuator is a widely used device in the electronics industry. Its ability to handle higher frequencies and higher power levels makes it suitable for a range of applications, from controlling EMI and RF interference in communication systems to improving signal-to-noise ratios of audio amplifiers. Its design allows it to effectively reduce noise without adversely affecting the quality of the signal.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...