Allicdata Part #: | AT-2207(46)-ND |
Manufacturer Part#: |
AT-2207(46) |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | ATTENUATOR 7DB |
More Detail: | RF Attenuator 7dB ±0.5dB 0Hz ~ 2.5GHz 50 Ohms 1W 4... |
DataSheet: | AT-2207(46) Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 7dB |
Frequency Range: | 0Hz ~ 2.5GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | 4-SMD, No Lead |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices that are used to reduce the amplitude and/or power in a signal. The AT-2207(46) is a type of attenuator that is used in a variety of applications. This article will discuss the various applications and working principles of the AT-2207(46).
Applications
The AT-2207(46) attenuator is designed to be used in the measurement of analog voltages in a variety of different settings. It can be used in resistance bridge circuits, control systems, and instrumentation projects. It is also useful in broadcasting studios and telecommunication networks due to its ability to reduce or control the level of a signal. In addition, the AT-2207(46) is often used in research and development applications, as it is capable of precise and accurate signal reduction.
Design and Construction
The AT-2207(46) is constructed using a series of resistors. The resistance network is designed so that the input signal is divided among the resistors. As the input signal propagates through the network, the total signal amplitude is reduced. The individual resistor values are determined by the desired amount of signal reduction as well as the required frequency response of the attenuator. The network can be designed so that the signal reduction is adjustable as well as being fixed.
Frequency Response
The AT-2207(46) has a flat frequency response up to 10MHz. This means that the amount of signal reduction is the same for all frequencies up to 10MHz. Above this frequency, the amount of signal reduction decreases. This decrease is gradual up to 50MHz before leveling off. This makes the AT-2207(46) ideal for applications that require precise signal levels over a wide range of frequencies.
Noise Attenuation
The AT-2207(46) is also capable of attenuating unwanted noise in a signal. This is done through the use of an integrated feedback network. This feedback network senses the noise present in the input signal and adjusts the resistance values accordingly to reduce the noise level. The AT-2207(46) is capable of reducing a 10dB noise level at 10MHz to less than 1dB.
Conclusion
The AT-2207(46) is a type of attenuator that is used in a variety of applications. It is designed with a series of resistors in order to reduce the total signal amplitude. Its frequency response is flat up to 10MHz and then gradually decreases until it levels off at 50MHz. Additionally, the AT-2207(46) is capable of attenuating noise levels in a signal and reducing them to low levels.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...