Allicdata Part #: | AT-2208(40)-ND |
Manufacturer Part#: |
AT-2208(40) |
Price: | $ 9.77 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | LOW POWER ATTENUATOR 208DB |
More Detail: | RF Attenuator 8dB ±0.5dB 0Hz ~ 2.5GHz 50 Ohms 1W 4... |
DataSheet: | AT-2208(40) Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 8.88300 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 8dB |
Frequency Range: | 0Hz ~ 2.5GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | 4-SMD, No Lead |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators: AT-2208(40) Application Field and Working Principle
Attenuators are commonly used devices with a very important role in many fields of technology. They are used to reduce the level of an AC voltage or an audio signal, thereby limiting the loudness of sounds.The AT-2208(40) Attenuator is one of the most commonly used attenuators. It is a single pole double throw (SPDT) resistive switching, unity gain amplifier with a 40 dB dynamic range. It provides 40 dB of attenuation in both directions.The AT-2208(40) Attenuator is typically used in communication systems, such as short and medium range radio networks. It can be used as a stand-alone Voltage Controlled Attenuator (VCA) or as a signal switching device for RF signal conditioning. It is also used in audio applications, such as sound reproduction systems and professional studio amplifiers.The working principle of the AT-2208(40) Attenuator is based on voltage divider logic. An input voltage is input to an R-C network. The R-C network is used to create two output nodes. The attenuation is determined by the ratio of the two outputs. A 1:1 ratio is used to provide 40 dB attenuation in both directions.The AT-2208(40) Attenuator is a very popular device due to its simple design, but it is not suitable for applications that require a wide dynamic range. It is designed for applications that require linear attenuation in the low frequencies. Its high frequency response is limited due to the size of the components.The AT-2208(40) Attenuator is often used in combination with other amplifiers, such as active crossover networks and equalizers. It is also used in preamplifiers, power amplifiers and mixer circuits.The AT-2208(40) Attenuator is a low cost, easy to use, and reliable device. It is an effective solution for applications that require moderate dynamic range and linear attenuation. It is also suitable for applications that require low noise and low distortion.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...