Allicdata Part #: | AT-2210(46)-ND |
Manufacturer Part#: |
AT-2210(46) |
Price: | $ 4.66 |
Product Category: | RF/IF and RFID |
Manufacturer: | Hirose Electric Co Ltd |
Short Description: | ATTENUATOR 10DB |
More Detail: | RF Attenuator 10dB ±0.7dB 0Hz ~ 2.5GHz 50 Ohms 1W ... |
DataSheet: | AT-2210(46) Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 4.23977 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 2.5GHz |
Power (Watts): | 1W |
Impedance: | 50 Ohms |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are a type of component used to lower the level of a signal from the input to the output. They are also known as voltage pads or voltage dividers. AT-2210(46) is a type of attenuator used to reduce an incoming signal while maintaining a low insertion loss. It is designed to provide an efficient and reliable method to reduce signal levels.
Application Field
AT-2210(46) can be used in a variety of applications, including test systems, laboratory applications, and general signal conditioning. It is capable of handling a wide range of frequencies, making it suitable for demanding high frequency applications. It is also robust, allowing it to be used in harsh environments. Moreover, its low insertion loss makes it especially suitable for applications that require precise control of signal levels. It can be used in systems to maintain the signal level and accuracy, or to reduce the signal on predetermined levels.
Working Principle
AT-2210(46) operates as a two-terminal linear device, in which the input signal is divided between two resistors of equal value and connected to the input and output ports respectively. When the two resistors are connected in series, a fraction of the applied signal is passed to the output. This fraction is equal to the ratio between the two resistors and is determined by the attenuator\'s ratio value. That is, the higher the ratio of the two resistors, the lower the output signal and the greater the attenuation.
The AT-2210(46) is designed to provide stable and consistent performance over a wide range of input frequencies. It is also designed to maintain low insertion loss while providing excellent isolation between input and output. In addition, it has a wide range of ratio values, allowing it to be used for a wide range of applications.
Conclusion
AT-2210(46) is a versatile attenuator that can be used in a variety of applications to reduce signal levels. It is designed to provide low insertion loss and excellent isolation between input and output. It is also robust and capable of handling a wide range of frequencies, making it suitable for demanding high frequency applications. It can be used to control signal levels and maintain signal accuracy in various systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...