AT-910(40)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An attenuator, also known as an attenuator pad, is a device used to reduce power level from one system to the next. This is typically used when one system requires a higher power level than is available from the source, or when the power needs to be adjusted to prevent overloading the output device. Attenuators come in many different configurations, and the AT-910(40) is one of the most versatile and reliable.

The AT-910(40) is a 40 dB directional pad with an average power rating of up to 50 watts. It can handle signal levels from 10mV all the way up to 10V, depending on the tolerance of the unit. It is designed to withstand a wide range of environmental conditions and is very resistant to harmonic distortion. Additionally, the AT-910(40) is a very reliable attenuator, with a mean time between failures of up to 10 years.

The AT-910(40) will provide the user with an excellent attenuation performance, with minimal insertion loss. This makes it ideal for applications such as broadcast and radio signal attenuation, as well as audio systems and wireless networks. It can also be used to reduce noise levels in an environment, as well as protect sensitive electronic equipment from electrical surges and power spikes.

The working principle behind the AT-910(40) is relatively straightforward. It essentially works by introducing an additional impedance in series with the signal, which results in a portion of the power being diverted to the attenuator itself. This results in a reduced voltage and current being transmitted from the source, making it much less likely to overload or damage any downstream devices.

The AT-910(40) can be used in a number of different ways, depending on the specific requirements of the application. It is typically used in series with the signal, but can also be connected in parallel in order to achieve a higher power level reduction. For example, if a signal needs to be attenuated by 40dB or more, then two directional pads can be used in series, with one pad providing 20dB of attenuation and the other providing the remaining 20dB.

Due to its versatile nature, the AT-910(40) directional pad can prove to be an invaluable tool in a variety of industries. Its reliability and minimal insertion loss make it ideal for applications such as broadcast and radio signal attenuation, as well as audio systems and wireless networks. Additionally, it can be used to reduce noise levels, protect sensitive equipment from power surges, and even increase the life of downstream devices.

The specific data is subject to PDF, and the above content is for reference