AT0603T05ECAS3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are a type of electronic component used in signal processing, designed to reduce the power of an electronic signal. The AT0603T05ECAS3 is a type of attenuator designed for use in a wide range of applications. It is a 6-bit variable 0.5dB attenuator, with one-time programmable attenuation, and is suitable for RF and microwave applications.

The AT0603T05ECAS3 is constructed from complementary metal oxide semiconductor (CMOS) technology and operates from 0.1Ω to 18GHz. It is capable of providing attenuation from 0dB to 60dB in 0.5dB steps with a maximum VSWR of 2.5:1, which allows it to be used in both digital and analog circuits. It also has a low insertion loss of just 0.02dB and a high port-to-port isolation of >30dB which makes it particularly suitable for applications where a low noise and low signal distortion is desired.

The AT0603T05ECAS3 has a variety of applications, ranging from radio frequency (RF) amplifiers and power dividers to antenna preselectors and oscillator attenuators. It can also be used in radar systems, test and measurement systems, and satellite communication systems, and is widely used in the automotive and consumer electronics industries. The wide range of frequency and attenuation values offered by the AT0603T05ECAS3 make it ideal for many applications.

The AT0603T05ECAS3 operates on the principle of phase shifters. The attenuation of the signal is accomplished by electronically controlling the phase shift of the signal between 0° and 360°. This is achieved by using an integrated MOSFET switch, whose gate voltage is controlled by an external voltage source. The MOSFET switch is controlled by a digital signal processor, which takes an analog input signal and outputs a digital signal with the correct amount of phase shift. This digital signal is then sent to the MOSFET switch, which operates as an attenuator, reducing the amplitude, or power, of the signal.

The AT0603T05ECAS3 is designed for ease of use and maximum flexibility. It has the ability to be externally programmed and reprogrammed, allowing users to easily adapt the device to their specific applications. The device also has four adjustable, user-programmable gain settings, which allows for maximum flexibility. The wide range of frequencies and attenuations are also programmable and the device is capable of being powered from either a single or dual voltage supply.

The AT0603T05ECAS3 is an incredibly versatile and powerful attenuator which can be used for a variety of applications. Its low insertion loss and wide frequency and attenuation range make it an ideal choice for both digital and analog systems. Its easy programming, low cost, and low power consumption make it an excellent choice for many applications.

The specific data is subject to PDF, and the above content is for reference