ATFC-0201HQ-1N4B-T

DC Resistance (DCR):	150 mOhm Max
Height - Seated (Max):	0.011" (0.28mm)
Size / Dimension:	0.024" L x 0.012" W (0.60mm x 0.30mm)
Supplier Device Package:	0201 (0603 Metric)
Package / Case:	0201 (0603 Metric)
Mounting Type:	Surface Mount
Inductance Frequency - Test:	500MHz
Operating Temperature:	-40°C ~ 85°C
Ratings:	--
Frequency - Self Resonant:	6GHz
Q @ Freq:	14 @ 500MHz
Series:	ATFC-0201HQ
Shielding:	Unshielded
Current - Saturation:	--
Current Rating:	600mA
Tolerance:	±0.1nH
Inductance:	1.4nH
Material - Core:	Ceramic
Type:	Thin Film
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors are components used all around electronic circuit boards. They provide functionality by being energy storage and release devices, allowing a variety of DC and high frequency AC circuit operations. Common examples are filters, voltage regulators, and locating coils. The ATFC-0201HQ-1N4B-T fixed inductor is a small and compact chip-like device used for high frequency and low voltage applications with power levels up to 10 W.The ATFC-0201HQ-1N4B-T fixed inductor consists of a small and highly conductive core structure with a coil-shaped conductor wound around it. It is typically sealed inside a case for safety reasons and there is a small capacitor connected at the end of the coil. This capacitor helps to reduce the influence of environmental noise on the inductor\'s behavior. The inductor\'s core structure and conductor also help to improve its performance.The ATFC-0201HQ-1N4B-T fixed inductor has a wide variety of applications, such as in DC-DC buck converters, voltage buck or gain stages, voltage doubling or ripple filter circuits, DC-DC switch-mode power converter circuits, radio frequency (RF) power amplifiers, tuned high-Q filters, and voltage boost circuits.The ATFC-0201HQ-1N4B-T fixed inductor works on the basic principle of inductance, which is the property of a conductor or coil of wire to oppose changes in its electric current. This is done by a magnetic field that surrounds the inductor\'s winding. When a voltage is applied across the winding, a current starts flowing through it, and this current creates its own magnetic field. This field opposes the decrease in the magnetic flux produced by the original voltage. This opposition is called inductive reactance and it prevents a rapid decay of the current.The ATFC-0201HQ-1N4B-T fixed inductor also exhibits a property called self-inductance, which is the ability of an inductor to maintain a steady current through its core despite changes in the external conditions. The ATFC-0201HQ-1N4B-T fixed inductor also has an inherent property called Q factor, which is the ratio between its reactance and resistance. High Q inductors have a better performance in terms of current control and filtering, compared to low Q inductors. The ATFC-0201HQ-1N4B-T fixed inductor can be used to filter certain frequencies, as well as to control current or voltage levels. Its size and efficiency makes it an ideal choice for medium power and high frequency applications where narrow pulses are expected.In summary, the ATFC-0201HQ-1N4B-T fixed inductor is a small and compact component which is used in a variety of electronic applications. Its principle of operation is based on inductance, self-inductance, and the Q factor, all of which enable it to control current, filter certain frequencies, and maintain a steady current flow despite external conditions. This makes it an ideal choice for medium power and high frequency applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description