Allicdata Part #: | ARF2786-ND |
Manufacturer Part#: |
ATS-2M2F-10DB2W |
Price: | $ 38.16 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | ATTENUATOR N JACK/PLUG 10DB 2W |
More Detail: | RF Attenuator 10dB 0Hz ~ 6GHz 50 Ohms 2W N-Type I... |
DataSheet: | ATS-2M2F-10DB2W Datasheet/PDF |
Quantity: | 4 |
1 +: | $ 34.68780 |
10 +: | $ 32.64910 |
25 +: | $ 31.62880 |
50 +: | $ 29.58830 |
100 +: | $ 27.95580 |
Series: | -- |
Packaging: | Bag |
Part Status: | Active |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are commonly used in electronic systems where a signal needs to be decreased or controlled. In order to achieve effective operation and a high performance, it is important to know the application field and working principle of a specific attenuator type. This article will discuss the application field and working principle of the ATS-2M2F-10DB2W attenuator in detail.
The ATS-2M2F-10DB2W attenuator is a two-port device that is connected to both the incoming signal and output links. It can control the power or amplitude of a signal by providing matching impedances when changes in frequency occur. This type of attenuator is typically used in the telecommunications sector to reduce the level of a transmitter or receiver’s signal. It can also be used to provide isolation between two frequencies, which is important in applications such as base stations or fiber-optic systems.
The working principle of the ATS-2M2F-10DB2W attenuator is relatively simple. It consists of two resistors that are connected in series. The first resistor is the ‘input’ resistor, while the second resistor is the ‘output’ resistor. The resistors are typically designed with different values depending on the attenuation needed. The resistors are connected in such a way that the input voltage is divided between the two resistors. The output voltage is then equal to the input voltage multiplied by the ratio of the two resistors.
The ATS-2M2F-10DB2W attenuator has a wide frequency range and provides 10dB attenuation. Its low insertion loss and return loss make it an efficient solution for applications where low distortion and minimal noise are desired. Furthermore, the device’s low insertion loss and high isolation means that it can provide good bandwidth performance even in high-frequency applications. Additionally, the ATS-2M2F-10DB2W attenuator is suitable for use in a variety of environments, from controlled lab settings to harsh outdoor environments.
Overall, the ATS-2M2F-10DB2W attenuator is a versatile, high-performance device that can be used in a variety of applications, including telecommunications networks, base stations, and fiber-optic systems. Its two-resistor design allows it to provide a high level of attenuation with low insertion loss and return loss. Additionally, its wide frequency range and low insertion loss make it a reliable and efficient solution for a variety of applications where low distortion and minimal noise is desired.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...