Allicdata Part #: | ARF2789-ND |
Manufacturer Part#: |
ATS-2M2F-15DB5W |
Price: | $ 49.81 |
Product Category: | RF/IF and RFID |
Manufacturer: | Amphenol RF Division |
Short Description: | ATTENUATOR N JACK/PLUG 15DB 5W |
More Detail: | RF Attenuator 15dB 0Hz ~ 6GHz 50 Ohms 5W N-Type I... |
DataSheet: | ATS-2M2F-15DB5W Datasheet/PDF |
Quantity: | 14 |
1 +: | $ 45.27180 |
10 +: | $ 42.60820 |
25 +: | $ 41.27660 |
50 +: | $ 38.61370 |
100 +: | $ 36.48320 |
Series: | -- |
Packaging: | Bag |
Part Status: | Active |
Attenuation Value: | 15dB |
Frequency Range: | 0Hz ~ 6GHz |
Power (Watts): | 5W |
Impedance: | 50 Ohms |
Package / Case: | N-Type In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators, also known as pads, are components that attenuate electronic signals. The ATS-2M2F-15DB5W belong to this family of components and are fixed termination attenuators. This article will discuss the application field and working principle of the ATS-2M2F-15DB5W.
The ATS-2M2F-15DB5W attenuator has an impedance rating of 50 Ohm and operating frequency of 10 MHz to 18 GHz with an attenuation of 15 dB. This allows it to be used in microwave communication systems such as satellite communication systems. The attenuator is also able to operate even with high power levels up to 200 watts.
The ATS-2M2F-15DB5W has two input and two output ports, one input port is for the signal to be attenuated and the other input port is for the termination reference, both input ports have standard SMA connectors. It also has two output ports with standard SMA connectors.
The working principle of the ATS-2M2F-15DB5W is relatively simple. It works by absorbing the incoming signal power and diminishing it by the specified amount. This is done through the use of two resistors connected in parallel which absorb the power proportionally. The termination reference is used to ensure that the input port of the attenuator is terminated with the correct impedance, allowing it to operate properly.
The ATS-2M2F-15DB5W can also be used when testing the performance of an antenna system by transmitting through the antenna system and attenuating the power output before measuring the received signal power. This allows for accurate measurements to be taken.
Aside from use in satellite communications systems, the ATS-2M2F-15DB5W attenuator is also used in GPS systems, radio frequency amplifiers, military communication systems, broadcast systems, and other microwave applications.
The ATS-2M2F-15DB5W is a versatile attenuator with a wide range of applications in different fields. It works by absorbing the incoming signal power and diminishing it by the specified amount and can also be used in testing the performance of an antenna system. The 50 Ohm impedance rating and 10 MHz to 18 GHz operating frequency also makes it a suitable component for a variety of microwave applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...