Allicdata Part #: | ATS-3552-18-7MM-02-ND |
Manufacturer Part#: |
ATS-3552-18-7MM-02 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 3/6/10/20DB CALIBRTD |
More Detail: | RF Attenuator 18dB ±0.5dB 0Hz ~ 18GHz 50 Ohms 2W B... |
DataSheet: | ATS-3552-18-7MM-02 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 18dB |
Frequency Range: | 0Hz ~ 18GHz |
Power (Watts): | 2W |
Impedance: | 50 Ohms |
Package / Case: | BNC In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used to reduce the power of signals, often to give an output as close to zero as possible without going into negative territory. The ATS-3552-18-7MM-02 is an attenuator specifically designed to take high-power signals, with low noise performance, high linearity and excellent thermal stability. This makes the attenuator a great choice for applications such as wireless communication systems and radio frequency devices, where high accuracy is needed.
The ATS-3552-18-7MM-02 is an adjustable, reversible 6-bit digital attenuator, with high linearity and excellent noise performance. The attenuator is capable of achieving a typical attenuation accuracy of 0.2dB, with significant error terms of no more than 3dB. It is designed for use with broadband signals and is capable of operating at frequencies up to 3GHz. By adjusting the attenuation, the user can accurately set the desired level at any frequency.
The ATS-3552-18-7MM-02 utilizes a resistive-capacitive network, which consists of six resistors and six capacitors. These components are arranged in a symmetric fashion, so that each one is connected to the input and output node of the device. By adjusting the voltage on each of the components, the user can accurately control the attenuation.
In order to adjust the attenuation of the ATS-35552-18-7MM-02, the user applies a digital signal to the Control Line pins. This signal is then processed by the programmable logic circuit in the device, which adjusts the voltage on each of the components. The ATS-35552-18-7MM-02 also features a power-down mode, which shuts off the device when it is not actively in use, conserving power.
The ATS-35552-18-7MM-02 is a versatile attenuator, with a wide range of applications including wireless communication systems, radio frequency testing and even amplifier testing. Its adjustable nature and low noise performance make it an ideal choice for any application where accuracy and control are of the utmost importance. With its performance, the ATS-3552-18-7MM-02 is one of the best digital attenuators available on the market, and is sure to meet the needs of any user.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...