Allicdata Part #: | ATT-0205-20-SMA-02-ND |
Manufacturer Part#: |
ATT-0205-20-SMA-02 |
Price: | $ 62.98 |
Product Category: | RF/IF and RFID |
Manufacturer: | Cinch Connectivity Solutions Midwest Microwave |
Short Description: | ATTENUATOR 20 DB DC 12.4GHZ |
More Detail: | RF Attenuator 20dB ±0.5dB 0Hz ~ 12.4GHz 2W SMA In... |
DataSheet: | ATT-0205-20-SMA-02 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 57.25570 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Active |
Attenuation Value: | 20dB |
Frequency Range: | 0Hz ~ 12.4GHz |
Power (Watts): | 2W |
Package / Case: | SMA In-Line Module |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An attenuator is an electronic device used to lower an input signal level. This is done by marked steps or continuously in a number of different ways. The ATT-0205-20-SMA-02 is a specific type of attenuator, however, its basic principles of operation are not vastly different from other types.
Application fields and Working Principle
The ATT-0205-20-SMA-02 is largely used by transmitters, amplifiers, and receivers to reduce the amplitude of a certain input signal, often to reduce the power that is transmitted. It is also often used in radio frequency applications to help match the input of a transmitter, amplifier, or receiver with the expected transmission line characteristics. There are also impedance matching applications in which the attenuator is used to control the amount of power passing through a transmission line, thus reducing most of the losses encountered due to high-frequency current.
How does the ATT-0205-20-SMA-02 work? This attenuator consists of two components, an “Input” and an “Output”. The signal, when passing through the device, is lowered in amplitude. This is achieved by just inserting the signal into the input connection. The current of the signal is then passed through a resistance which is typically installed in the device, resulting in attenuation. This resistance causes most of the power in the signal to dissipate, with only a fraction actually getting to the output.
The amount of attenuation is proportional to the amount of resistance in the device. The resistance value is expressed in dB and can be adjusted by selecting a resistance with a lower or higher value. In this way, a different amount of attenuation can be achieved.
Another important factor in the operation of the ATT-0205-20-SMA-02 is the temperature coefficient of the resistance. This is because when the temperature changes, the resistance value changes as well. This means that the attenuation of the signal changes as well, creating a temperature drift of the system. To minimize this drift, the resistance used in the device must have a low temperature coefficient.
To sum up, the ATT-0205-20-SMA-02 is an adjustable attenuator, used to reduce the amplitude of a signal. It works by passing the signal through a resistance which is typically installed inside the device. The amount of attenuation is proportional to the amount of resistance. However, it is important to take into account the temperature coefficient of the resistance, in order to minimize drift of the system.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...